{"id":10677,"date":"2026-07-20T09:43:05","date_gmt":"2026-07-20T09:43:05","guid":{"rendered":"https:\/\/ic-vendor.com\/txu0202dcur\/"},"modified":"2026-07-20T09:43:05","modified_gmt":"2026-07-20T09:43:05","slug":"txu0202dcur","status":"publish","type":"post","link":"https:\/\/ic-vendor.com\/es\/txu0202dcur\/","title":{"rendered":"TXU0202DCUR"},"content":{"rendered":"<h2>Productos<\/h2>\n<p>The TXU0202DCUR from Texas Instruments is a 2-bit dual-supply fixed-direction voltage-level translator in a VSSOP-8 (DCU) package. With opposite-direction channels (A1-to-B1 and B2-to-A2), Schmitt-trigger inputs, integrated pull-down resistors, and support for 1.1V to 5.5V rails at up to 200 Mbps, it is ideal for UART, SPI, and general-purpose I\/O level shifting.<\/p>\n<h2>Especificaciones<\/h2>\n<table>\n<tr>\n<td>Canales<\/td>\n<td>2 (opposite direction)<\/td>\n<\/tr>\n<tr>\n<td>Velocidad de datos<\/td>\n<td>200 Mbps (3.3V to 5V)<\/td>\n<\/tr>\n<tr>\n<td>Voltage Range<\/td>\n<td>1.1V &#8211; 5.5V (both ports)<\/td>\n<\/tr>\n<tr>\n<td>Direction<\/td>\n<td>Fixed: A1->B1, B2->A2<\/td>\n<\/tr>\n<tr>\n<td>Input Type<\/td>\n<td>Schmitt-trigger<\/td>\n<\/tr>\n<tr>\n<td>Retardo de propagaci\u00f3n<\/td>\n<td>10 ns (typical)<\/td>\n<\/tr>\n<tr>\n<td>Drive Strength<\/td>\n<td>12 mA @ 5V<\/td>\n<\/tr>\n<tr>\n<td>Corriente de reposo<\/td>\n<td>2.5 uA max (25 deg C)<\/td>\n<\/tr>\n<tr>\n<td>Paquete<\/td>\n<td>VSSOP-8 (DCU) 2&#215;3.1 mm<\/td>\n<\/tr>\n<tr>\n<td>Temperature<\/td>\n<td>-40 to +125 deg C<\/td>\n<\/tr>\n<\/table>\n<h2>Caracter\u00edsticas<\/h2>\n<ul>\n<li>Opposite-direction channels ideal for UART TX\/RX level shifting<\/li>\n<li>Schmitt-trigger inputs tolerate slow and noisy input signals<\/li>\n<li>Integrated static pull-down resistors prevent floating channels<\/li>\n<li>VCC isolation and VCC disconnect (Ioff-float) for power sequencing<\/li>\n<li>Pin-compatible with TXB family level shifters<\/li>\n<\/ul>\n<h2>Aplicaciones<\/h2>\n<ul>\n<li>UART level shifting between MCU and USB-to-serial chips<\/li>\n<li>SPI and JTAG interface voltage translation<\/li>\n<li>General-purpose I\/O level shifting in multi-voltage systems<\/li>\n<li>Driving indicator LEDs and buzzers across voltage domains<\/li>\n<li>Mechanical switch debouncing with Schmitt-trigger inputs<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Product Overview The TXU0202DCUR from Texas Instruments is a 2-bit dual-supply fixed-direction voltage-level translator in a VSSOP-8 (DCU) package. With opposite-direction channels (A1-to-B1 and B2-to-A2), Schmitt-trigger inputs, integrated pull-down resistors, and support for 1.1V to 5.5V rails at up to 200 Mbps, it is ideal for UART, SPI, and general-purpose I\/O level shifting. Key Specifications [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,20],"tags":[2018],"chip_brand":[138],"class_list":["post-10677","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-interface-ics","tag-txu0202dcur","chip_brand-ti"],"acf":{"brief_explanation":"2-bit fixed-direction level translator, opposite channels, 200Mbps, 1.1-5.5V, Schmitt-trigger, VSSOP-8","date_code":"","package_case":"VSSOP-8 (DCU) 2x3.1 mm","in_stock":4701,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/txu0202.pdf","price":"$0.365 @ 1ku","product_introduction":"The TXU0202 is a 2-bit dual-supply noninverting fixed-direction voltage-level translator from Texas Instruments, designed with opposite-direction channels (A1-to-B1 and B2-to-A2) making it ideal for UART and other bidirectional bus level shifting. The A port operates from 1.1V to 5.5V (VCCA) and the B port from 1.1V to 5.5V (VCCB). Schmitt-trigger inputs provide noise immunity on slow signals, while integrated pull-down resistors prevent channels from floating when not driven. The OE pin with VCC(MIN) circuitry allows control from either supply domain. VCC isolation and Ioff-float features ensure glitch-free operation during power sequencing.","working_principle":"The TXU0202 uses dual-supply level-shifting buffers between VCCA and VCCB domains. Channel 1 transmits from A1 to B1, while Channel 2 transmits from B2 to A2, providing opposite-direction paths on a single device. The OE (output enable) pin, referenced to either VCCA or VCCB via internal VCC(MIN) circuitry, controls the tri-state of all outputs. When OE is LOW, all outputs enter high-impedance state. When OE is HIGH, data flows through the enabled channels. Schmitt-trigger inputs on all data pins provide hysteresis for noise rejection on slowly transitioning signals. If either VCC drops below 100 mV or is disconnected, all outputs are disabled and become high-impedance.","pin_description":"<table><tr><th>Pin<\/th><th>Name<\/th><th>Type<\/th><th>Function<\/th><\/tr><tr><td>1<\/td><td>VCCA<\/td><td>Power<\/td><td>A-port supply (1.1-5.5V)<\/td><\/tr><tr><td>2<\/td><td>A1<\/td><td>Input<\/td><td>Channel 1 input (A to B direction)<\/td><\/tr><tr><td>3<\/td><td>B2<\/td><td>Input<\/td><td>Channel 2 input (B to A direction)<\/td><\/tr><tr><td>4<\/td><td>GND<\/td><td>Power<\/td><td>Ground<\/td><\/tr><tr><td>5<\/td><td>OE<\/td><td>Input<\/td><td>Output enable (active high)<\/td><\/tr><tr><td>6<\/td><td>A2Y<\/td><td>Output<\/td><td>Channel 2 output (B-to-A)<\/td><\/tr><tr><td>7<\/td><td>B1Y<\/td><td>Output<\/td><td>Channel 1 output (A-to-B)<\/td><\/tr><tr><td>8<\/td><td>VCCB<\/td><td>Power<\/td><td>B-port supply (1.1-5.5V)<\/td><\/tr><\/table>","application_scenarios":"<ul><li>UART level shifting: opposite channels match TX\/RX directions perfectly<\/li><li>MCU to USB-serial bridge: translate between 1.8V MCU and 3.3V bridge<\/li><li>SPI interface: fixed direction for CLK\/MOSI\/MISO translation<\/li><li>LED\/buzzer driving: 12 mA drive strength across voltage domains<\/li><li>Noisy signal conditioning: Schmitt-trigger cleans slow edges<\/li><\/ul>","alternative_models":"<table><tr><th>Manufacturer<\/th><th>Part Number<\/th><th>Package<\/th><th>Notes<\/th><\/tr><tr><td>TI<\/td><td>TXU0102DCUR<\/td><td>VSSOP-8<\/td><td>Same direction channels variant<\/td><\/tr><tr><td>TI<\/td><td>TXB0102DCUR<\/td><td>VSSOP-8<\/td><td>Auto-direction version, pin-compatible<\/td><\/tr><tr><td>TI<\/td><td>TXU0202DTTM<\/td><td>X2SON-8<\/td><td>Ultra-small 0.8x1.35mm package<\/td><\/tr><tr><td>Nexperia<\/td><td>74LVC2T814DC<\/td><td>VSSOP-8<\/td><td>Similar dual translator<\/td><\/tr><tr><td>onsemi<\/td><td>NXS0102QBX<\/td><td>QFN-8<\/td><td>2-bit level translator<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/posts\/10677","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/comments?post=10677"}],"version-history":[{"count":0,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/posts\/10677\/revisions"}],"wp:attachment":[{"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/media?parent=10677"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/categories?post=10677"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/tags?post=10677"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/chip_brand?post=10677"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}