{"id":10679,"date":"2026-07-20T09:43:08","date_gmt":"2026-07-20T09:43:08","guid":{"rendered":"https:\/\/ic-vendor.com\/txs02612rtwr\/"},"modified":"2026-07-20T09:43:08","modified_gmt":"2026-07-20T09:43:08","slug":"txs02612rtwr","status":"publish","type":"post","link":"https:\/\/ic-vendor.com\/es\/txs02612rtwr\/","title":{"rendered":"TXS02612RTWR"},"content":{"rendered":"<h2>Productos<\/h2>\n<p>The TXS02612RTWR from Texas Instruments is an SDIO port expander with voltage-level translation in a WQFN-24 (RTW) 4&#215;4 mm package. It integrates a 6-channel SPDT switch with level translation, allowing a single SDIO port to interface with two SDIO peripherals at independent voltages (1.1V to 3.6V), with +\/-8 kV IEC ESD on the B port.<\/p>\n<h2>Especificaciones<\/h2>\n<table>\n<tr>\n<td>Funci\u00f3n<\/td>\n<td>6-channel SPDT switch + level translation<\/td>\n<\/tr>\n<tr>\n<td>Ports<\/td>\n<td>1 SDIO (A) to 2 SDIO (B0\/B1)<\/td>\n<\/tr>\n<tr>\n<td>Velocidad de datos<\/td>\n<td>120 Mbps<\/td>\n<\/tr>\n<tr>\n<td>Voltage Range<\/td>\n<td>1.1V &#8211; 3.6V (VCCA, VCCB0, VCCB1)<\/td>\n<\/tr>\n<tr>\n<td>Supply Current<\/td>\n<td>36 uA max<\/td>\n<\/tr>\n<tr>\n<td>Select Input<\/td>\n<td>SEL (referenced to VCCA)<\/td>\n<\/tr>\n<tr>\n<td>ESD (B Port)<\/td>\n<td>+\/-8 kV IEC 61000-4-2 contact<\/td>\n<\/tr>\n<tr>\n<td>Paquete<\/td>\n<td>WQFN-24 (RTW) 4&#215;4 mm<\/td>\n<\/tr>\n<tr>\n<td>Temperature<\/td>\n<td>-40 a +85 grados C<\/td>\n<\/tr>\n<\/table>\n<h2>Caracter\u00edsticas<\/h2>\n<ul>\n<li>6-to-12 demultiplexer\/multiplexer for SDIO port expansion<\/li>\n<li>Built-in level translation eliminates voltage mismatch between baseband and SD card<\/li>\n<li>Three independent supply rails (VCCA, VCCB0, VCCB1) for maximum flexibility<\/li>\n<li>+\/-8 kV IEC ESD on B port for robust SD card interface protection<\/li>\n<li>70 kOhm pull-up resistors on unselected B port data and command lines<\/li>\n<\/ul>\n<h2>Aplicaciones<\/h2>\n<ul>\n<li>Cell phone baseband to SD card and SDIO peripheral interfacing<\/li>\n<li>Bluetooth and WLAN module expansion via SDIO<\/li>\n<li>Mobile TV and DVB-H module connection<\/li>\n<li>Multi-card SD\/MMC reader designs<\/li>\n<li>Portable consumer electronics SDIO multiplexing<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Product Overview The TXS02612RTWR from Texas Instruments is an SDIO port expander with voltage-level translation in a WQFN-24 (RTW) 4&#215;4 mm package. It integrates a 6-channel SPDT switch with level translation, allowing a single SDIO port to interface with two SDIO peripherals at independent voltages (1.1V to 3.6V), with +\/-8 kV IEC ESD on the [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,20],"tags":[2020],"chip_brand":[138],"class_list":["post-10679","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-interface-ics","tag-txs02612rtwr","chip_brand-ti"],"acf":{"brief_explanation":"SDIO port expander with level translation, 6-ch SPDT, 1.1-3.6V, +\/-8kV ESD, WQFN-24","date_code":"","package_case":"WQFN-24 (RTW) 4x4 mm","in_stock":4525,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/txs02612.pdf","price":"$0.680 @ 1ku","product_introduction":"The TXS02612 is an SDIO port expander with integrated voltage-level translation from Texas Instruments, designed to interface a cell phone baseband processor with two SDIO peripherals such as SD\/MMC cards, Bluetooth modules, or WLAN adapters. The device includes a 6-channel SPDT switch (CLK, CMD, DAT0-DAT3) with bidirectional level translation capability, allowing the A port and two B ports to operate at different supply voltages from 1.1V to 3.6V. The SEL pin chooses between B0 and B1 ports, while 70 kOhm pull-up resistors on unselected B port data and command lines ensure proper bus idle states.","working_principle":"The TXS02612 uses a 6-channel SPDT switch matrix to connect the A port (baseband side) to either the B0 or B1 port (peripheral side). The SEL pin, referenced to VCCA, determines which B port is active. For the selected B port, all 6 channels (CLK, CMD, DAT0-DAT3) pass bidirectional data with integrated level translation between VCCA and the selected VCCB. The CLK channel for the unselected port is held LOW, while DAT and CMD lines are pulled HIGH to their respective VCCB through 70 kOhm resistors. The level translation uses edge-rate accelerators for fast transitions, supporting data rates up to 120 Mbps. The B port features +\/-8 kV IEC ESD protection for direct SD card connector connection.","pin_description":"<table><tr><th>Pin<\/th><th>Name<\/th><th>Type<\/th><th>Function<\/th><\/tr><tr><td>1<\/td><td>DAT2A<\/td><td>I\/O<\/td><td>Data bit 2, A port<\/td><\/tr><tr><td>3<\/td><td>DAT3A<\/td><td>I\/O<\/td><td>Data bit 3, A port<\/td><\/tr><tr><td>4<\/td><td>CMDA<\/td><td>I\/O<\/td><td>Command, A port<\/td><\/tr><tr><td>5<\/td><td>VCCA<\/td><td>Power<\/td><td>A-port supply (1.1-3.6V)<\/td><\/tr><tr><td>6<\/td><td>DAT0A<\/td><td>I\/O<\/td><td>Data bit 0, A port<\/td><\/tr><tr><td>7<\/td><td>DAT1A<\/td><td>I\/O<\/td><td>Data bit 1, A port<\/td><\/tr><tr><td>9<\/td><td>CLKA<\/td><td>Input<\/td><td>Clock input, A port<\/td><\/tr><tr><td>24<\/td><td>SEL<\/td><td>Input<\/td><td>Port select (Low=B0, High=B1)<\/td><\/tr><tr><td>2,11<\/td><td>GND<\/td><td>Power<\/td><td>Ground<\/td><\/tr><\/table>","application_scenarios":"<ul><li>Smartphone SD card + Bluetooth: expand one SDIO to two peripherals<\/li><li>Mobile TV: connect DVB-H module and SD card simultaneously<\/li><li>WLAN + SD card: dual SDIO peripheral with independent voltage levels<\/li><li>Multi-card readers: switch between two SD\/MMC card slots<\/li><li>Portable GPS: SDIO expansion for GPS module and storage<\/li><\/ul>","alternative_models":"<table><tr><th>Manufacturer<\/th><th>Part Number<\/th><th>Package<\/th><th>Notes<\/th><\/tr><tr><td>TI<\/td><td>TXS02612ZQSR<\/td><td>VFBGA-25<\/td><td>Same function, BGA package<\/td><\/tr><tr><td>TI<\/td><td>TXS020629ABLR<\/td><td>WQFN-24<\/td><td>Similar SDIO expander<\/td><\/tr><tr><td>NXP<\/td><td>CBTL06GP213<\/td><td>QFN-24<\/td><td>6-channel MUX for SDIO<\/td><\/tr><tr><td>onsemi<\/td><td>NC7SB3157P6X<\/td><td>MicroPak-6<\/td><td>Single SPDT switch (lower channel count)<\/td><\/tr><tr><td>Renesas<\/td><td>NC7SB3157P6X<\/td><td>SC-88A<\/td><td>Single channel alternative<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/posts\/10679","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/comments?post=10679"}],"version-history":[{"count":0,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/posts\/10679\/revisions"}],"wp:attachment":[{"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/media?parent=10679"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/categories?post=10679"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/tags?post=10679"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/chip_brand?post=10679"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}