{"id":7791,"date":"2026-06-27T03:11:57","date_gmt":"2026-06-27T03:11:57","guid":{"rendered":"https:\/\/ic-vendor.com\/drv8432dkdr\/"},"modified":"2026-06-28T10:21:09","modified_gmt":"2026-06-28T10:21:09","slug":"drv8432dkdr","status":"publish","type":"post","link":"https:\/\/ic-vendor.com\/es\/drv8432dkdr\/","title":{"rendered":"DRV8432DKDR"},"content":{"rendered":"<h2>Productos<\/h2>\n<p>The DRV8432DKDR is a dual full-bridge PWM motor driver from Texas Instruments with up to 2 \u00d7 7A continuous output current (2 \u00d7 12A peak). It features 110 m\u03a9 RDS(ON) MOSFETs, 52.5V load voltage, 500 kHz switching, and comprehensive protection in a 36-pin HSSOP package with heat slug. (Note: this product has been discontinued.)<\/p>\n<h2>Especificaciones<\/h2>\n<table>\n<tr>\n<td>Configuraci\u00f3n<\/td>\n<td>Dual full-bridge (4 half-bridges)<\/td>\n<\/tr>\n<tr>\n<td>Continuous Output Current<\/td>\n<td>2 \u00d7 7A (dual full-bridge)<\/td>\n<\/tr>\n<tr>\n<td>Peak Output Current<\/td>\n<td>2 \u00d7 12A (dual full-bridge)<\/td>\n<\/tr>\n<tr>\n<td>Load Voltage (PVDD)<\/td>\n<td>0 V to 52.5 V<\/td>\n<\/tr>\n<tr>\n<td>Logic Supply (GVDD\/VDD)<\/td>\n<td>10.8 V to 13.2 V (12 V nominal)<\/td>\n<\/tr>\n<tr>\n<td>RDS(ON) (HS + LS)<\/td>\n<td>110 m\u03a9 + 110 m\u03a9<\/td>\n<\/tr>\n<tr>\n<td>PWM Frequency<\/td>\n<td>Up to 500 kHz<\/td>\n<\/tr>\n<tr>\n<td>Efficiency<\/td>\n<td>Up to 97%<\/td>\n<\/tr>\n<tr>\n<td>Temperatura de funcionamiento<\/td>\n<td>-40\u00b0C to +150\u00b0C (junction)<\/td>\n<\/tr>\n<tr>\n<td>Paquete<\/td>\n<td>HSSOP-36 (DKD), with heat slug<\/td>\n<\/tr>\n<\/table>\n<h2>Caracter\u00edsticas<\/h2>\n<ul>\n<li>High-efficiency power stage up to 97%<\/li>\n<li>Low RDS(ON): 110 m\u03a9 per switch at 25\u00b0C<\/li>\n<li>Up to 52.5V load supply voltage<\/li>\n<li>2 \u00d7 7A continuous, 2 \u00d7 12A peak output<\/li>\n<li>Parallel mode: 14A continuous, 24A peak<\/li>\n<li>PWM up to 500 kHz switching frequency<\/li>\n<li>Programmable cycle-by-cycle current limit<\/li>\n<li>Overcurrent, overtemperature, UVLO, short circuit protection<\/li>\n<li>Independent supply and ground per half-bridge<\/li>\n<li>Intelligent gate drive with cross-conduction prevention<\/li>\n<li>No external snubber or Schottky diode required<\/li>\n<\/ul>\n<h2>Aplicaciones<\/h2>\n<ul>\n<li>Brushed DC and stepper motors<\/li>\n<li>Three-phase PMSM motors<\/li>\n<li>Robotics and haptic control<\/li>\n<li>Actuators and pumps<\/li>\n<li>TEC (thermoelectric cooler) drivers<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Product Overview The DRV8432DKDR is a dual full-bridge PWM motor driver from Texas Instruments with up to 2 \u00d7 7A continuous output current (2 \u00d7 12A peak). It features 110 m\u03a9 RDS(ON) MOSFETs, 52.5V load voltage, 500 kHz switching, and comprehensive protection in a 36-pin HSSOP package with heat slug. (Note: this product has been [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[36,13],"tags":[],"chip_brand":[],"class_list":["post-7791","post","type-post","status-publish","format-standard","hentry","category-gate-driver-ics","category-integrated-circuits-ics"],"acf":{"brief_explanation":"Dual H-bridge motor driver, 2x7A, 52.5V, 110m\u03a9, 500kHz, HSSOP-36 (OBSOLETE)","date_code":"","package_case":"HSSOP-36 (15.9 x 14.2 mm, with heat slug)","in_stock":14743,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/drv8412.pdf","price":"$26.85 @ 2ku","product_introduction":"The DRV8432 is a high-performance dual full-bridge PWM motor driver from Texas Instruments with an advanced protection system. It features low RDS(ON) MOSFETs (110 m\u03a9) achieving up to 97% efficiency, enabling smaller power supplies and heatsinks. The DRV8432 supports up to 2 \u00d7 7A continuous output current (2 \u00d7 12A peak) in dual full-bridge mode, or 14A continuous (24A peak) in parallel mode. It requires two power supplies: 12V for GVDD\/VDD and up to 50V for PVDD. The device operates at up to 500 kHz switching frequency and includes programmable cycle-by-cycle current limit, overcurrent, overtemperature, undervoltage, and short circuit protection. Note: This product has been obsoleted by TI; recommended replacements are DRV8462 or DRV8962.","working_principle":"The DRV8432 integrates four half-bridge power stages using N-channel MOSFETs with 110 m\u03a9 RDS(ON) per switch. Each half-bridge has independent PVDD and GND pins, allowing different supply voltages per bridge and enabling current sensing through external shunt resistors. The gate drive circuit uses bootstrap capacitors to drive the high-side NMOS gates, with intelligent timing to prevent cross-conduction. PWM inputs control each half-bridge independently. The M1\/M2\/M3 pins select the operating mode: dual full-bridge (2 or 4 PWM), parallel full-bridge, or complementary PWM mode. The OC_ADJ pin with an external resistor sets the overcurrent threshold for cycle-by-cycle current limiting. The OTW (overtemperature warning) and FAULT outputs provide real-time status. An internal 3.3V regulator (VREG) powers the digital logic. The thermal pad and heat slug must be properly heatsinked for full-current operation.","pin_description":"<table border=\"1\" cellpadding=\"4\">\n<tr><th>Pin<\/th><th>Name<\/th><th>Type<\/th><th>Description<\/th><\/tr>\n<tr><td>1-4<\/td><td>GVDD_B\/C\/D, NC<\/td><td>Power<\/td><td>Gate drive supplies<\/td><\/tr>\n<tr><td>5<\/td><td>PWM_D<\/td><td>Input<\/td><td>Half-bridge D PWM input<\/td><\/tr>\n<tr><td>6<\/td><td>RESET_CD<\/td><td>Input<\/td><td>Reset bridges C and D (active low)<\/td><\/tr>\n<tr><td>7<\/td><td>PWM_C<\/td><td>Input<\/td><td>Half-bridge C PWM input<\/td><\/tr>\n<tr><td>8-10<\/td><td>M1, M2, M3<\/td><td>Input<\/td><td>Mode selection pins<\/td><\/tr>\n<tr><td>11<\/td><td>VREG<\/td><td>Power<\/td><td>Internal 3.3V regulator filter<\/td><\/tr>\n<tr><td>12<\/td><td>AGND<\/td><td>Power<\/td><td>Analog ground<\/td><\/tr>\n<tr><td>13<\/td><td>GND<\/td><td>Power<\/td><td>Digital ground<\/td><\/tr>\n<tr><td>14<\/td><td>OC_ADJ<\/td><td>Analog<\/td><td>Overcurrent programming resistor<\/td><\/tr>\n<tr><td>15-18<\/td><td>PWM_B\/A, RESET_AB<\/td><td>Input<\/td><td>Bridge A\/B PWM and reset<\/td><\/tr>\n<tr><td>19-22<\/td><td>OTW, GVDD_B, FAULT<\/td><td>Output<\/td><td>Status outputs and gate supply<\/td><\/tr>\n<tr><td>23-36<\/td><td>PVDD\/GND\/OUT<\/td><td>Power<\/td><td>Bridge power and outputs<\/td><\/tr>\n<\/table>","application_scenarios":"<ul>\n<li><strong>Brushed DC Motor Drive:<\/strong> Dual full-bridge mode drives two independent DC motors with up to 7A continuous current each<\/li>\n<li><strong>Stepper Motor Control:<\/strong> Dual H-bridge configuration supports bipolar stepper motors with 12A peak current<\/li>\n<li><strong>Robotics and Haptics:<\/strong> 500 kHz PWM enables precise force and position control in robotic actuators<\/li>\n<li><strong>TEC Drivers:<\/strong> Bidirectional current capability and high efficiency suit thermoelectric cooler applications<\/li>\n<li><strong>Industrial Actuators:<\/strong> 52.5V load voltage and 97% efficiency support high-power industrial motion systems<\/li>\n<\/ul>","alternative_models":"<table border=\"1\" cellpadding=\"4\">\n<tr><th>Model<\/th><th>Manufacturer<\/th><th>Key Difference<\/th><th>Package<\/th><th>Specs<\/th><\/tr>\n<tr><td>DRV8462DDWR<\/td><td>TI<\/td><td>Direct replacement, improved, in production<\/td><td>-<\/td><td>-<\/td><\/tr>\n<tr><td>DRV8962DDWR<\/td><td>TI<\/td><td>Direct replacement, improved, in production<\/td><td>-<\/td><td>-<\/td><\/tr>\n<tr><td>DRV8412DDWR<\/td><td>TI<\/td><td>3A version (44-pin HTSSOP)<\/td><td>-<\/td><td>-<\/td><\/tr>\n<tr><td>L298N<\/td><td>ST<\/td><td>2A per bridge, through-hole, lower cost<\/td><td>-<\/td><td>-<\/td><\/tr>\n<tr><td>TMC6140-TA<\/td><td>Trinamic<\/td><td>3-phase, similar power range<\/td><td>-<\/td><td>-<\/td><\/tr>\n<\/table>"},"_links":{"self":[{"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/posts\/7791","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/comments?post=7791"}],"version-history":[{"count":0,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/posts\/7791\/revisions"}],"wp:attachment":[{"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/media?parent=7791"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/categories?post=7791"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/tags?post=7791"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/ic-vendor.com\/es\/wp-json\/wp\/v2\/chip_brand?post=7791"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}