TLC2274AQPWRQ1

Product Overview The TLC2274AQPWRQ1 is a TI automotive-qualified quad rail-to-rail output op amp. AEC-Q100 Grade 1 with extended +125C operation. 2.18MHz GBW and 1.9V/us slew rate. Rail-to-rail output swing. 4.5V-16V supply. TSSOP-20 package. For automotive sensor conditioning and active filters. Key Specifications Type Quad Rail-to-Rail Op Amp (Automotive) Channels 4 Supply Voltage 4.5V to 16V […]

S-25C320A0I-J8T1U3

Product Overview The S-25C320A0I-J8T1U3 from Seiko Epson is a 32Mbit serial NOR flash with quad SPI interface. 80MHz clock in quad mode. 4KB and 64KB erase sectors. 4MB capacity for firmware and data storage. USON-8 6x5mm industrial package. Suitable for consumer and industrial embedded applications. Key Specifications Type 32Mbit Serial NOR Flash Density 32 Mbit […]

BL24C16APARC

Product Overview The BL24C16APARC from Belling is a 16Kbit I2C serial EEPROM with high-speed 1MHz I2C support. 1.7V-5.5V supply. 1M cycle endurance. 100-year data retention. 3ms write time. SOP-8 150mil package. Compatible with industry-standard 24C16. Key Specifications Type 16 Kbit Serial EEPROM Density 16 Kbit (2K x 8) Interface I2C (up to 1 MHz) Page […]

P24C04C-UNH-MIR

Product Overview The P24C04C-UNH-MIR from Microchip is a 4Kbit I2C serial EEPROM with automotive AEC-Q100 qualification. 1.7V-5.5V supply. 1M cycle endurance with 100-year data retention. UFDFN-8 2x3mm package. The MIR suffix denotes automotive tape and reel with reversed orientation. Key Specifications Type 4 Kbit Serial EEPROM Density 4 Kbit (512 x 8) Interface I2C (up […]

W25Q16JVBYIQ

Product Overview The W25Q16JVBYIQ from Winbond is a 16Mbit serial NOR flash with standard/dual/quad SPI. 133MHz clock in quad mode for 66MB/s read. 2MB density. 4KB sector erase. USON-8 ultra-compact 2x3mm package. Industrial grade. For space-constrained embedded firmware storage. Key Specifications Type 16Mbit Serial NOR Flash Density 16 Mbit (2MB) Interface SPI (Standard/Dual/Quad) Clock Frequency […]

MR4A08BYS35

Product Overview The MR4A08BYS35 from Everspin is an 8Mbit (1Mx8) parallel MRAM with 35ns access time. SRAM-compatible parallel interface with unlimited write endurance – no wear-out mechanism. 20-year data retention without power. 3.3V supply. TSOP-44 package. Ideal for data logging and nonvolatile storage requiring frequent writes. Key Specifications Type Magnetoresistive Random Access Memory (MRAM) Density […]

M95256-WMN6TP

Product Overview The M95256-WMN6TP from ST is a 256Kbit SPI serial EEPROM organized as 32Kx8. 20MHz SPI clock. 1M cycle endurance with 50-year data retention. 1.8V-5.5V wide supply range. Status register with block protection. TSSOP-8 package. Tape and reel. Key Specifications Type 256 Kbit Serial EEPROM Density 256 Kbit (32K x 8) Interface SPI (up […]

R1LP0108ESN-5SI#S1

Product Overview The R1LP0108ESN-5SI#S1 from Renesas is an 8Mbit (1Mx8) low-power asynchronous SRAM. 55ns access time with 15uA standby current for battery-backup operation. 3.3V supply. TSOP-32 industrial package. For mobile and battery-backed memory applications. Key Specifications Type Low-Power Asynchronous SRAM Density 8 Mbit (1M x 8) Organization 1M x 8 Access Time 55 ns Supply […]

R5F51306ADFN#30

Product Overview The R5F51306ADFN#30 is a Renesas R8C/3G 16-bit MCU with 96KB Flash and 8KB RAM. 24MHz operation. CAN, 4 UARTs, dual I2C, and SPI. 10-bit 12-ch ADC and dual 8-bit DAC. LQFP-80 package. A cost-optimized variant of the R5F51308 with 96KB flash. Key Specifications Type 16-bit R8C Microcontroller Core R8C Flash 96 KB RAM […]

ATMEGA168PA-AU(20014798C)

Product Overview The ATMEGA168PA-AU is a Microchip 8-bit AVR picoPower microcontroller with 16KB Flash, 1KB SRAM, and 512B EEPROM. 20MHz operation. 10-bit ADC. USART, SPI, I2C interfaces. The (20014798C) denotes lot/date code traceability. TQFP-32 package. Widely used in Arduino projects. Key Specifications Type 8-bit AVR Microcontroller Core AVR (picoPower) Flash 16 KB SRAM 1 KB […]

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.