CD4097BPWR

Product Overview The CD4097BPWR from TI is a differential 8-channel analog multiplexer/demultiplexer with 400 ohm max ON resistance. It selects one of 8 differential pairs under 3-bit address control, suitable for differential signal routing in instrumentation and data acquisition. Key Specifications Function Differential 8-channel analog multiplexer Channels 8 differential pairs ON Resistance 400 ohm max […]

74LV4094D,118

Product Overview The 74LV4094D,118 from Nexperia is an 8-bit shift register with output latches and 3-state outputs. It features a cascade output (QS) for daisy-chaining multiple devices, enabling serial-to-parallel conversion for LED displays and I/O expansion with minimal pin count. Key Specifications Function 8-bit shift register with output latch Supply Voltage 1.0V to 5.5V Shift […]

MC74HC4066ADR2G

Product Overview The MC74HC4066ADR2G from onsemi is a quad bilateral analog switch with 70 ohm ON resistance at 6V supply. Each of the four SPST switches is independently controlled, enabling analog signal routing for audio, video, and instrumentation applications. Key Specifications Function Quad bilateral analog switch ON Resistance 70 ohm at 6V, 90 ohm at […]

THS4041CDR

Product Overview The THS4041CDR from TI is a single high-speed voltage-feedback operational amplifier with 165 MHz gain-bandwidth product and 270 V/µs slew rate. The 29 ns settling time to 0.1% makes it excellent for high-speed data acquisition and video signal processing. Key Specifications Function Single high-speed voltage-feedback op-amp Gain-Bandwidth Product 165 MHz Slew Rate 270 […]

MAX3243CPW

Product Overview The MAX3243CPW from Maxim is a 3-driver/5-receiver RS-232 transceiver with auto-powerdown feature that reduces supply current to 1 µA when all receivers are idle. It operates from 3.0V to 5.5V with ±15 kV ESD protection, targeting battery-powered and low-power serial communication. Key Specifications Function 3-driver / 5-receiver RS-232 transceiver Data Rate Up to […]

PI5A3166CEX

Product Overview The PI5A3166CEX from Diodes Incorporated is a single SPDT (single-pole double-throw) analog switch with ultra-low 2.5 ohm ON resistance in a tiny SC70-6 package. The wide 1.65V to 5.5V supply range and 5 pC charge injection make it suitable for audio signal routing and battery-powered analog switching. Key Specifications Function Single SPDT analog […]

MAX3080ECSD+

Product Overview The MAX3080ECSD+ from Maxim is a 5V full-duplex RS-485/RS-422 transceiver supporting 10 Mbps data rate with ±15 kV ESD protection. Full-duplex operation uses separate driver and receiver channels for simultaneous bidirectional communication on 4-wire buses. Key Specifications Function Full-duplex RS-485/RS-422 transceiver Data Rate Up to 10 Mbps Supply Voltage 5V ESD Protection ±15 […]

IQS269A00QNR

Product Overview The IQS269A00QNR from Azoteq is a 14-channel ProxSense capacitive touch and proximity controller with automatic calibration. It provides both proximity detection (hover) and touch detection, making it ideal for advanced HMI with gesture capabilities. Key Specifications Function ProxSense capacitive touch controller Channels 14 capacitive sensing channels Detection Proximity + touch Interface I2C / […]

CAT25080YI-GT3

Product Overview The CAT25080YI-GT3 from onsemi (formerly Catalyst) is an 8 Kbit SPI serial EEPROM with 20 MHz clock rate and 1 million erase/write cycle endurance. It supports SPI modes 0 and 3 with sector/page protection for critical data integrity. Key Specifications Function 8 Kbit SPI serial EEPROM Density 8 Kbit (1 Kbyte) Interface SPI […]

MP24833GN-Z

Product Overview The MP24833GN-Z from MPS (Monolithic Power Systems) is a 4-channel LED backlight driver operating from 4.5V to 26V input with 55 mA per string. It integrates a boost converter and 4 current sinks for LCD panel backlight driving with PWM dimming. Key Specifications Function 4-channel LED backlight driver Input Voltage 4.5V to 26V […]