TPS2211AIDBR

Product Overview The TPS2211AIDBR from TI is a power distribution switch for PCMCIA and CardBus slots, providing switchable 3.3V and 5V power rails with 1A current limiting per output. It includes fault reporting and auto-discharge for safe card hot-insertion. Key Specifications Function PCMCIA / CardBus power switch Outputs 3.3V and 5V switchable rails Current Limit […]

TL1963AKTTR

Product Overview The TL1963AKTTR from TI is a 1A very low dropout LDO regulator with only 340 mV dropout at full load. The wide input range up to 20V and SOT-223 package make it suitable for post-regulation from 12V or 15V rails in industrial and automotive applications. Key Specifications Function 1A, very low dropout LDO […]

PCM1770RGAR

Product Overview The PCM1770RGAR from TI is a 24-bit stereo audio DAC with integrated headphone amplifier, achieving 100 dB dynamic range and -85 dB THD+N. It supports up to 48 kHz sample rate via I2S interface and is designed for portable audio devices and consumer electronics. Key Specifications Function 24-bit stereo audio DAC with headphone […]

LTC1694CS5#TRPBF

Product Overview The LTC1694CS5#TRPBF from Analog Devices is a dual N-channel MOSFET gate driver in a tiny SOT-23-5 package. It provides ±1.5A peak drive current with 15 ns typical rise/fall times, suitable for synchronous buck converter MOSFET driving in compact power supplies. Key Specifications Function Dual N-channel MOSFET gate driver Output Current ±1.5A peak Supply […]

M74LCX16245DTR2G

Product Overview The M74LCX16245DTR2G from onsemi is a 16-bit bidirectional bus transceiver with 3.3V operation and 5V-tolerant inputs. It provides two 8-bit transceivers with independent direction and output enable controls, ideal for buffering 16-bit data buses between 3.3V and 5V domains. Key Specifications Function 16-bit bidirectional bus transceiver Supply Voltage 2.0V to 3.6V Propagation Delay […]

DS2003TM

Product Overview The DS2003TM from Maxim is a 7-channel Darlington transistor array capable of 500 mA per channel at up to 50V collector voltage. Built-in clamp diodes protect against inductive kickback from relay and stepper motor loads. It is pin-compatible with the industry-standard ULN2003. Key Specifications Function 7-channel Darlington transistor array Output Current 500 mA […]

MCP1406T-E/SN

Product Overview The MCP1406T-E/SN from Microchip is a 6A peak single MOSFET/IGBT gate driver with inverting input logic. It provides 25 ns typical rise/fall times with 1 nF load, suitable for high-frequency switch-mode power supplies and motor drives. Key Specifications Function 6A single MOSFET/IGBT gate driver Output Current 6A peak Input Logic Inverting Supply Voltage […]

ADS130E08IPAGR

Product Overview The ADS130E08IPAGR from TI is an 8-channel 24-bit simultaneous-sampling delta-sigma ADC with up to 64 kSPS data rate per channel. It is designed for power quality monitoring, protective relaying, and multi-channel data acquisition where simultaneous sampling is critical. Key Specifications Function 8-channel 24-bit simultaneous-sampling ADC Resolution 24-bit Channels 8 simultaneous Data Rate Up […]

ADP124ARHZ-3.3-R7

Product Overview The ADP124ARHZ-3.3-R7 from Analog Devices is a 3.3V fixed-output LDO regulator delivering 500 mA with only 280 mV dropout and 25 µA quiescent current. The 70 dB PSRR makes it ideal for noise-sensitive RF and analog power rails in portable and battery-powered systems. Key Specifications Function 3.3V fixed, 500mA LDO Output Voltage 3.3V […]

MER1S1205SC

Product Overview The MER1S1205SC from Murata is a 1W isolated DC-DC converter converting 12V input to 5V output with 1 kV DC isolation. It is designed for distributed power architectures, providing isolated power rails for I2C, RS-485, and CAN bus transceivers. Key Specifications Function 1W isolated DC-DC converter Input Voltage 12V Output Voltage 5V Output […]