TPS76318DBVT

Product Overview The TPS76318DBVT from TI is a 1.8V fixed 150 mA LDO regulator with 150 mV dropout and 85 µA quiescent current. The wide 2.7V to 10V input range and low IQ suit battery-powered applications needing a stable 1.8V rail. Key Specifications Function 1.8V fixed, 150mA low-Iq LDO Output Voltage 1.8V fixed Output Current […]

DS2003TM/NOPB

Product Overview The DS2003TM/NOPB from Maxim is a 7-channel Darlington transistor array, pin-compatible with ULN2003, capable of 500 mA per channel at 50V with built-in clamp diodes. The /NOPB suffix indicates the lead-free (Pb-free) grade. Key Specifications Function 7-channel Darlington transistor array Output Current 500 mA per channel Collector Voltage 50V max Clamp Diode Built-in […]

ADM810LARTZ-REEL7

Product Overview The ADM810LARTZ-REEL7 from Analog Devices is a microprocessor supervisory reset circuit with 2.93V threshold and 140 ms reset timeout. The push-pull active-low output provides a clean reset to the MCU during power-up, brownout, and power-down. Key Specifications Function Microprocessor supervisory reset Reset Output Active-low push-pull Threshold 2.93V (L grade) Reset Timeout 140 ms […]

LM317LDR2G

Product Overview The LM317LDR2G from onsemi is a 100 mA adjustable positive voltage regulator with output range 1.2V to 37V. It is the SMD version of the classic LM317L, providing excellent line/load regulation and thermal/overcurrent protection in a SOT-223 package. Key Specifications Function 100mA adjustable positive LDO Output Current 100 mA Output Voltage 1.2V to […]

SN74CBTLV3253PW

Product Overview The SN74CBTLV3253PW from TI is a dual 4:1 multiplexer/demultiplexer with 6 ohm max ON resistance and >500 MHz bandwidth. Two independent 4:1 sections share common select lines, suitable for differential signal routing in high-speed data paths. Key Specifications Function Dual 4:1 multiplexer/demultiplexer ON Resistance 6 ohm max Supply Voltage 2.3V to 3.6V Bandwidth […]

PCT2075DP,118

Product Overview The PCT2075DP,118 from NXP is an I2C digital temperature sensor with ±1°C accuracy over -25°C to +100°C and 0.125°C resolution. It is a pin-compatible upgrade to the LM75 with improved resolution and programmable OS/OT hysteresis for thermostat control. Key Specifications Function I2C digital temperature sensor Accuracy ±1°C (-25 to +100°C) Resolution 0.125°C (11-bit) […]

LM258DR

Product Overview The LM258DR from TI is a dual general-purpose operational amplifier with 1.1 MHz gain-bandwidth product, operating from 3V to 32V single supply or ±1.5V to ±16V dual supply. It is the industry-standard LM358 variant with improved specifications. Key Specifications Function Dual general-purpose op-amp GBW Product 1.1 MHz Slew Rate 0.5 V/µs Supply Voltage […]

STI9287

Product Overview The STI9287 from STMicroelectronics is an HD set-top box decoder SoC integrating an ST40 (SH-4) CPU core at 350 MHz with multi-format video decode (H.264, MPEG-2, VC-1), audio decode, HDMI output, and conditional access security for pay-TV applications. Key Specifications Function HD set-top box decoder SoC Core ST40 (SH-4) 350 MHz Video Decode […]

88E1240-A1-BAM1C000

Product Overview The 88E1240-A1-BAM1C000 from Marvell is a quad-port 10/100/1000 Gigabit Ethernet PHY with RGMII/SGMII MAC-side interface and IEEE 802.3az Energy Efficient Ethernet. Four independent PHY channels in a single package reduce BOM for multi-port switches and routers. Key Specifications Function Quad-port Gigabit Ethernet PHY Ports 4 independent 10/100/1000 Interface RGMII / SGMII to MAC […]

PEX8712-CA80BC G

Product Overview The PEX8712-CA80BC G from Broadcom is a 12-port, 48-lane PCI Express 3.0 switch supporting 8 GT/s per lane. It provides both transparent and non-transparent port modes with embedded DMA for high-performance server, storage, and networking platforms. Key Specifications Function PCI Express 3.0 switch Ports 12 ports, 48 lanes Data Rate 8 GT/s per […]

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.