Home > Integrated Circuits ICs > CAT25080YI-GT3

CAT25080YI-GT3

8Kbit SPI EEPROM, 20MHz, 1M cycles, TSSOP-8

11214

Effective Inventory

Image for reference only

Manufacturer Part：

CAT25080YI-GT3

Package：

TSSOP-8

Brand：

Onsemi

Product Categories：

Integrated Circuits ICs

Other recommendations you may be interested in.

SN74LVC1G11DCKR

Description

Product Overview

The CAT25080YI-GT3 from onsemi (formerly Catalyst) is an 8 Kbit SPI serial EEPROM with 20 MHz clock rate and 1 million erase/write cycle endurance. It supports SPI modes 0 and 3 with sector/page protection for critical data integrity.

Key Specifications

Function	8 Kbit SPI serial EEPROM
Density	8 Kbit (1 Kbyte)
Interface	SPI (Mode 0 and 3)
Clock Rate	Up to 20 MHz
Endurance	1 million erase/write cycles
Supply Voltage	1.8V to 5.5V
Package	TSSOP-8 (4.4x3mm)

Working Principle

SPI interface (SI, SO, SCK, CS) provides synchronous serial access to 1024 bytes of non-volatile memory. Page write allows writing 16 bytes at a time. Hardware write-protect (WP) pin and software status register protect against accidental writes. Hold (HOLD) pin pauses serial communication without resetting the device.

Applications

Configuration storage
Calibration data
User preference storage
Serial number / ID

Product Introduction:CAT25080YI-GT3 Product Introduction

The CAT25080YI-GT3 from onsemi (formerly Catalyst) is an 8 Kbit SPI serial EEPROM with 20 MHz clock rate and 1 million erase/write cycle endurance. It supports SPI modes 0 and 3 with sector/page protection for critical data integrity.

Working Principle:CAT25080YI-GT3 Working Principle

SPI interface (SI, SO, SCK, CS) provides synchronous serial access to 1024 bytes of non-volatile memory. Page write allows writing 16 bytes at a time. Hardware write-protect (WP) pin and software status register protect against accidental writes. Hold (HOLD) pin pauses serial communication without resetting the device.

Pin Description:CAT25080YI-GT3 Pin Definition and Functions

Pin	Name	Description
1	CS	Chip select (active low)
2	SO	Serial data output
3	WP	Write protect
4	VSS	Ground
5	SI	Serial data input
6	SCK	Serial clock
7	HOLD	Hold
8	VDD	Supply

Application Scenarios:In which products and applications isCAT25080YI-GT3 used

Configuration storage
Calibration data
User preference storage
Serial number / ID

Alternative Models:What chips are recommended as replacements for CAT25080YI-GT3

Model	Manufacturer	Key Difference
AT25080B	Microchip	Equivalent SPI EEPROM

Recommend Parts

CAN/CAN FD transceiver, 5Mbps, VIO, SOT-14

Brand:

NXP

Package:

SOT-14 (HVSON, 3.0 x 4.5mm)

In stock:

13982pcs

Cargo cycle: 3~7 Days
The minimum order is 1

OptiMOS 5 N-ch 80V 7.5mΩ 73A MOSFET, PQFN 3.3×3.3mm

Brand:

infineon

Package:

PG-TSDSON-8 (PQFN 3.3 x 3.3mm)

In stock:

3223pcs

Cargo cycle: 3~7 Days
The minimum order is 1

OptiMOS 5 N-ch 100V 4mΩ 136A MOSFET, SuperSO8

Brand:

infineon

Package:

PG-TDSON-8 (SuperSO8, 5 x 6mm)

In stock:

10509pcs

Cargo cycle: 3~7 Days
The minimum order is 1

SN74LVC1G11DCKR

Single 3-input AND gate, 1.65-5.5V, SOT-353

Brand:

TI

Package:

SOT-353 (SC-70-5)

In stock:

7410pcs

Cargo cycle: 3~7 Days
The minimum order is 1

2Gbit DDR3 SDRAM, 128Mx16, DDR3-1333, 1.5V, 96-BGA

Brand:

Winbond

Package:

96-WBGA

In stock:

10910pcs

Cargo cycle: 3~7 Days
The minimum order is 1

128Mbit DDR SDRAM, 8Mx16, DDR400, 2.5V, 66-TSOP-II Commercial

Brand:

Winbond

Package:

66-TSOP II

In stock:

7071pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Quality Assurance

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:

Automotive Electronics: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
Medical Devices: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

Contact Us

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

Email: info@ic-vendor.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

Shipping & Payment

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:

Accepted Payment Methods

T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
PayPal: Ideal for small orders, sample orders and quick payments.

Settlement Currency

US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.
Bank Charges

All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.
Payment Requirements

Sample and small orders: Shipment will be arranged upon full payment.
In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:

Logistics Partners

International Express: DHL, FedEx, UPS, TNT
Economy Logistics: Air freight and sea freight for large-volume cargo
Domestic Delivery: SF Express, Yunda Express

Order Processing Time

In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.

Estimated Transit Time

International Express: 3 – 7 working days globally
Air Freight: 7 – 12 working days
Sea Freight: 25 – 40 working days for heavy and large bulk cargo

Shipping Fee Rules

Shipping cost is calculated based on package weight, volume, destination and delivery method.
Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.

Shipment Tracking

Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

MOQ & Sample Service

We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.
Packaging Standard

All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

Import Duties & Taxes

All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.
Handling of Lost or Damaged Goods

In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:

Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@ic-vendor.com

Tel / WhatsApp: +86 13760382860

Service & Packaging

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

All components are packed separately to avoid damage caused by friction and collision;
Shockproof buffer materials are added for fragile products to ensure transportation safety;
Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@ic-vendor.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China