AD8609ARUZ


Precision quad micro-power CMOS op-amp, 50uV offset, 1pA bias current, 22nV/rootHz noise, 1.8-5V single supply, rail-to-rail I/O, 400kHz GBP, 14-TSSOP, ADI.

8920

Effective Inventory
Go to Inquiry

Image for reference only

Manufacturer Part:

AD8609ARUZ

Package:

14-Lead TSSOP

Brand:
Product Categories:
Other recommendations you may be interested in.
Description

Product Overview

The AD8609ARUZ is a precision quad micro-power CMOS operational amplifier from Analog Devices, featuring rail-to-rail input and output operation with extremely low offset voltage and low input bias current. Using a patented trimming technique that achieves superior precision without laser trimming, this quad amplifier delivers 50 microvolt maximum offset voltage, 1 pA maximum input bias current, and 22 nV per root Hz noise density, all while consuming only 50 microamps per amplifier. Operating from a single 1.8V to 5.0V supply or dual plus/minus 0.9V to plus/minus 2.5V supplies, the AD8609ARUZ is ideal for battery-powered and loop-powered instrumentation. The rail-to-rail input and output capability enables direct interfacing with CMOS ADCs, DACs, and ASICs in low-power single-supply systems. Additional features include no phase reversal even with inputs exceeding the supply rails, unity-gain stability, and low distortion. The AD8609ARUZ is packaged in a 14-lead TSSOP and specified over the extended temperature range of -40 degrees C to +125 degrees C.

Key Specifications

Parameter Value
Number of Amplifiers 4 (Quad)
Offset Voltage (VOS) 50 microvolts max at 25C (VS=3.3V, VCM=0.5V & 2.8V)
Offset Voltage Drift 4.5 microvolts per degree C max (-40C to +125C)
Input Bias Current (IB) 1 pA max at 25C; 50 pA max at 85C
Input Offset Current (IOS) 0.5 pA max at 25C
Input Voltage Noise Density 22 nV/root Hz at 10 kHz; 25 nV/root Hz at 1 kHz
Current Noise Density 0.05 fA/root Hz at 1 kHz
0.1Hz-10Hz Noise (p-p) 3.5 microvolts p-p max
Supply Voltage Range 1.8 V to 5.0 V single supply; plus/minus 0.9V to plus/minus 2.5V dual
Supply Current per Amp 50 microamps max at 25C; 60 microamps max at 125C
Gain Bandwidth Product (GBP) 400 kHz typ (RL=100k ohm); 316 kHz typ (RL=10k ohm)
Slew Rate (SR) 0.1 V per microsecond typ
Settling Time (0.1%) 23 microseconds typ (G=1, 2V step)
Common-Mode Rejection Ratio 100 dB typ; 85 dB min (0V to 5V VCM)
Power Supply Rejection Ratio 100 dB typ; 80 dB min
Large Signal Voltage Gain 450 V/mV min (RL=10k ohm)
Input Voltage Range -0.3V to +5.2V (single 5V supply)
Output Voltage Swing Rail-to-rail: 30mV from V-; 30mV from V+ (1mA load)
Short Circuit Current plus/minus 70 mA typ
Channel Separation -115 dB at 10 kHz; -110 dB at 100 kHz
Package 14-Lead TSSOP
Operating Temperature -40 degrees C to +125 degrees C

Features

  • Ultra-low offset voltage: 50 microvolts maximum at 25C
  • Extremely low input bias current: 1 pA maximum
  • Wide single-supply operation: 1.8V to 5.0V
  • Low voltage noise: 22 nV/root Hz at 10 kHz
  • Micropower consumption: 50 microamps per amplifier max
  • Rail-to-rail input and output swing
  • Low total harmonic distortion
  • No phase reversal – even with inputs exceeding supply rails by 1V
  • Unity gain stable with capacitive loads
  • Patented trimming technology – no laser trimming required
  • Input overvoltage protection up to 1V beyond supplies (with series resistor)
  • Excellent channel separation: -115 dB at 10 kHz
  • LTspice simulation model available
  • Available in SOIC and TSSOP packages
  • Extended temperature range: -40C to +125C
  • RoHS compliant

Applications

  • Battery-powered and portable instrumentation
  • Multipole active filters and signal conditioning
  • High-impedance sensor amplification
  • Low-power ASIC input and output amplifiers
  • Loop-powered 4-20mA transmitters
  • Photodiode preamplifiers and optical sensors
  • Data acquisition frontends
  • Medical instrumentation and patient monitoring
  • Wearable and energy-harvesting devices
  • ADC input buffering and DAC output buffering

The AD8609ARUZ is a four-channel precision micro-power CMOS operational amplifier from Analog Devices, offering an exceptional combination of low offset voltage, low input bias current, low noise, and extremely low power consumption. Using a proprietary and patented trimming technique, the AD8609 achieves 50 microvolt maximum offset voltage without the need for laser trimming, delivering precision performance that competes with much higher power devices. With a supply current of only 50 microamps per amplifier and operation from supplies as low as 1.8V, this device is exceptionally well-suited for battery-powered and energy-harvesting applications where power budget is extremely constrained. The rail-to-rail input and output architecture ensures maximum dynamic range in single-supply systems, with input voltage extending 0.3V below the negative rail and 0.2V above the positive rail. The output swings to within 30mV of both rails with a 1mA load. A particularly notable feature is the absence of phase reversal, even when the input voltage exceeds the supply rails by up to 1V – a common failure mode in many CMOS amplifiers that can cause system lockup. Input overvoltage protection allows safe operation with inputs up to 1V beyond the supplies when current-limited with a series resistor. The AD8609ARUZ is a member of the AD8603/AD8607/AD8609 family, with single (AD8603), dual (AD8607), and quad (AD8609) versions sharing identical electrical specifications per channel. The quad version is offered in both 14-lead SOIC and 14-lead TSSOP packages, with the TSSOP providing significantly reduced board footprint. All versions are fully specified over the extended industrial temperature range of -40 degrees C to +125 degrees C, and are supported by LTspice simulation models and comprehensive application documentation from Analog Devices.

The AD8609ARUZ is a CMOS operational amplifier designed for low-power precision applications. Its architecture is based on a rail-to-rail input stage that combines P-channel and N-channel differential pairs to achieve input common-mode range from below the negative rail to above the positive rail. At low common-mode voltages, the P-channel pair conducts; at high common-mode voltages, the N-channel pair takes over. The transition between the two pairs occurs in the mid-supply region, and a patented trimming technique ensures that the offset voltage remains low throughout the entire common-mode range, achieving the 50 microvolt maximum specification at the critical points where offset is typically best (at VCM = 0.5V and 2.8V on a 3.3V supply). The gain stage uses a folded cascode architecture to achieve high open-loop gain (typically 1000 V/mV) while maintaining low power consumption. The output stage is a class AB rail-to-rail amplifier that can both source and sink current, driving the output very close to both supply rails. Unity-gain stability is achieved through internal frequency compensation, and the amplifier remains stable with capacitive loads up to reasonable values. The extremely low input bias current (1 pA) is a characteristic of CMOS input transistors, where the gate current is essentially leakage current only. This very low bias current makes the AD8609 suitable for interfacing with high-impedance sources such as photodiodes, piezoelectric sensors, and high-value resistive circuits. The low noise performance of 22 nV/root Hz is achieved through careful design of the input differential pair, balancing thermal noise from the input transistors against the power consumption budget. The patented trimming technology adjusts both offset voltage and input stage matching during manufacturing, achieving precision comparable to laser-trimmed amplifiers but with lower cost and better long-term stability.

Pin No. Name Description
1 OUT A Output of amplifier A
2 -IN A Inverting input of amplifier A
3 +IN A Non-inverting input of amplifier A
4 VDD (VS+) Positive supply voltage – 1.8V to 5.0V single supply
5 +IN B Non-inverting input of amplifier B
6 -IN B Inverting input of amplifier B
7 OUT B Output of amplifier B
8 OUT C Output of amplifier C
9 -IN C Inverting input of amplifier C
10 +IN C Non-inverting input of amplifier C
11 GND (VS-) Ground / negative supply voltage
12 +IN D Non-inverting input of amplifier D
13 -IN D Inverting input of amplifier D
14 OUT D Output of amplifier D
  • Battery-powered portable test and measurement instruments
  • 4-20mA loop-powered transmitters and industrial sensors
  • Photodiode transimpedance amplifiers for optical sensors
  • High-impedance sensor signal conditioning (piezoelectric, MEMS)
  • Multipole low-power active filters and signal conditioning
  • ADC input buffering and DAC output buffering in low-power systems
  • Medical instrumentation: patient monitoring, portable diagnostics
  • Wearable electronics and energy-harvesting powered devices
  • Low-power ASIC input/output interface amplifiers
  • Data acquisition systems with strict power constraints
Model Manufacturer Key Difference
AD8609ARZ Analog Devices Same performance, 14-lead SOIC package instead of TSSOP
AD8607ARMZ Analog Devices Dual version (2 amplifiers), 8-MSOP package, same specs per channel
LTC6078 ADI / Linear Tech Dual micropower precision CMOS op-amp, 125uA, lower noise
MCP6004 Microchip Quad low-power CMOS op-amp, similar specs, alternative vendor
OPA4340 Texas Instruments Quad zero-drift CMOS op-amp, lower offset drift, higher cost
Recommend Parts
Dual N-channel MOSFET, 20V VDS, 7A ID, 26mΩ RDS(on) @ 4.5V, trench tech, low gate charge 15.2nC, logic-level drive, SOIC-8, AOS AO9926A.

Package:

SOIC-8 / SOP-8

In stock:

25000pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
Low-power 4ADC/2DAC audio codec with DSP, 38us analog-to-analog latency, 102dB/107dB SNR, ANC headsets, ASRC, PDM I/O, self-boot, 40-LFCSP 6x6mm, ADI SigmaDSP.

Package:

40-Lead LFCSP (6mm x 6mm, EP)

In stock:

4280pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
SigmaDSP 28/56-bit audio processor with 2x ADC + 4x DAC, 50 MIPS, 192kHz, self-boot from EEPROM, I2C/SPI control, 48-LQFP, ADI ADAU1701 series.

Package:

48-Lead LQFP (7mm x 7mm)

In stock:

3860pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
High precision quad op-amp, 50uV offset, 0.75uV/C drift, 6.9nV/rootHz noise, 3.9MHz GBP, 120dB CMRR/PSRR, 400uA/amp, MSL1, 14-SOIC, ADI ADA4077 family.

Package:

14-Lead SOIC

In stock:

5480pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
Marvell Avastar 88W8782 single-chip WLAN SoC, 802.11a/b/g/n dual-band, 1×1 SISO, 150Mbps, integrated PA/LNA/CPU, SDIO/SPI/USB host interface, QFN package.

Brand:

Package:

QFN / TFBGA

In stock:

3120pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
N-channel JFET low-noise audio transistor, 40V VGDS, 6-12mA IDSS (BL grade), 22mS transconductance, 0.5dB noise figure, TO-92, for phono preamps and MC head amplifiers.

Brand:

Package:

TO-92

In stock:

7840pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
Quality Assurance

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • Automotive Electronics: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • Medical Devices: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

Contact Us

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@ic-vendor.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

Shipping & Payment

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.
  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@ic-vendor.com

Tel / WhatsApp: +86 13760382860

Service & Packaging

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@ic-vendor.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.