ADA4077-4AR


High precision quad op-amp, 50uV offset, 0.75uV/C drift, 6.9nV/rootHz noise, 3.9MHz GBP, 120dB CMRR/PSRR, 400uA/amp, MSL1, 14-SOIC, ADI ADA4077 family.

5480

Effective Inventory
Go to Inquiry

Image for reference only

Manufacturer Part:

ADA4077-4AR

Package:

14-Lead SOIC

Brand:
Product Categories:
Other recommendations you may be interested in.
Description

Product Overview

The ADA4077-4AR is a high-precision quad operational amplifier from Analog Devices, featuring extremely low offset voltage, ultra-low drift, and low noise while maintaining low power consumption. Part of the ADA4077 family (single/dual/quad), the A-grade quad version delivers 50 microvolt maximum offset voltage at 25C and 0.75 microvolt per degree C maximum drift over the full -40C to +125C temperature range. With only 400 microamps supply current per amplifier, the device achieves 6.9 nV/root Hz voltage noise density, 1 nA maximum input bias current, and 3.9 MHz gain bandwidth product on plus/minus 5V supplies. The dual-supply device operates from plus/minus 2.5V to plus/minus 15V and features CMRR, PSRR, and open-loop gain all exceeding 120 dB minimum. Outputs are stable with capacitive loads greater than 1000 pF with no external compensation. The ADA4077-4AR holds an MSL1 moisture sensitivity rating – the most stringent level – and is specified over the extended industrial temperature range of -40C to +125C. Packaged in a 14-lead SOIC, it is ideal for precision sensor conditioning, process control frontends, instrumentation amplifiers, and precision filter designs.

Key Specifications

Parameter Value (A-grade, Quad SOIC)
Number of Amplifiers 4 (Quad)
Offset Voltage (VOS) @ 25C 50 microvolts max (A-grade); 15 microvolts typ
Offset Voltage Drift 0.75 microvolts per degree C max; 0.4 microvolts per degree C typ
Input Bias Current (IB) @ 25C 1 nA max
Voltage Noise Density (en) 6.9 nV/root Hz typ @ 1 kHz
0.1Hz-10Hz Noise (p-p) 0.25 microvolts p-p typ
Current Noise Density (in) 140 fA/root Hz typ
Gain Bandwidth Product (GBP) 3.9 MHz typ @ plus/minus 5V
Slew Rate (SR) 1.8 V per microsecond typ
Open-Loop Gain (AVO) 120 dB min
Common-Mode Rejection Ratio (CMRR) 120 dB min
Power Supply Rejection Ratio (PSRR) 120 dB min
Supply Voltage Range plus/minus 2.5V to plus/minus 15V (dual); specified at plus/minus 5V to plus/minus 15V
Supply Current per Amp 400 microamps typ; 650 microamps max
Input Voltage Range Within 2V of each supply rail
Output Voltage Swing Within 1.5V of rails (10k ohm load)
Capacitive Load Stability Stable with > 1000 pF load, no external compensation needed
Long-Term Offset Drift 0.5 microvolts typ (10,000 hours)
Temperature Hysteresis 1 microvolt typ
MSL Rating MSL1 (most stringent)
Package 14-Lead SOIC
Operating Temperature -40 degrees C to +125 degrees C

Features

  • Extremely low offset voltage: 50 microvolts maximum (A-grade quad) at 25C
  • Ultra-low offset drift: 0.75 microvolts per degree C max over full temperature range
  • Low input bias current: 1 nA maximum at 25C
  • Low voltage noise: 6.9 nV/root Hz typical at 1 kHz
  • CMRR, PSRR, and AVO all exceed 120 dB minimum
  • Low supply current: 400 microamps per amplifier typical
  • Wide gain bandwidth product: 3.9 MHz at plus/minus 5V supplies
  • Dual-supply operation: plus/minus 2.5V to plus/minus 15V
  • Unity gain stable with capacitive loads > 1000 pF
  • No phase reversal at input overdrive
  • Excellent long-term stability: 0.5 microvolt drift over 10,000 hours
  • Temperature hysteresis: 1 microvolt typical
  • MSL1 rated – highest moisture sensitivity level rating
  • Pin-compatible upgrade for OP4177 and OP400
  • Available in single, dual, and quad configurations
  • B-grade available in single and dual versions for higher precision
  • Extended industrial temperature range: -40C to +125C
  • LTspice simulation model available
  • RoHS compliant

Applications

  • Process control front-end amplifiers and signal conditioning
  • Precision sensor signal conditioning (thermocouples, RTDs, strain gauges)
  • Optical network control circuits and precision diode power measurement
  • Industrial and laboratory instrumentation
  • Precision active filters and analog signal processing
  • Voltage and current measurement circuits
  • Precision level setting and reference buffering
  • Instrumentation amplifier frontends
  • Data acquisition and precision data conversion systems
  • Medical and healthcare precision equipment

The ADA4077-4AR is a four-channel high-precision operational amplifier from Analog Devices, designed for demanding precision applications where ultra-low offset, minimal drift, and high common-mode rejection are critical. As the quad member of the ADA4077 family (alongside the single-channel ADA4077-1 and dual-channel ADA4077-2), the ADA4077-4 delivers A-grade precision specifications including 50 microvolt maximum offset voltage at 25C and 0.75 microvolt per degree C maximum offset drift over the full -40C to +125C temperature range. These specifications are achieved through advanced design techniques and precision manufacturing processes, without resorting to chopper stabilization or auto-zero techniques that can introduce switching artifacts and current noise. The device features a bipolar input stage providing 1 nA maximum input bias current – notably lower than many comparably priced precision amplifiers – while achieving 6.9 nV/root Hz voltage noise density. The combination of low offset, low drift, low noise, and low bias current makes the ADA4077-4AR exceptionally versatile for a wide range of precision signal conditioning applications. Operating from dual supplies of plus/minus 2.5V to plus/minus 15V, the amplifier achieves over 120 dB of CMRR, PSRR, and open-loop gain – performance levels typically found in much higher power devices. A particularly valuable feature for production is its MSL1 (Moisture Sensitivity Level 1) rating, the most stringent classification, meaning the device can be stored indefinitely before soldering without dry-packing concerns and is compatible with the most demanding SMT assembly processes. The output is stable with capacitive loads exceeding 1000 pF without external compensation, simplifying design with cables or capacitive sensor interfaces. Long-term drift of only 0.5 microvolts over 10,000 hours and temperature hysteresis of 1 microvolt ensure consistent performance over the lifetime of the end product. The ADA4077-4AR is a pin-compatible performance upgrade for the OP4177 and OP400 families.

The ADA4077-4AR is a precision bipolar operational amplifier that uses a carefully designed input stage and advanced trimming to achieve exceptional DC accuracy. The input stage consists of a carefully matched bipolar differential pair that provides low noise and low bias current. Precision trimming of the input stage offset is performed during manufacturing to achieve the ultra-low 50 microvolt maximum offset specification. The differential pair feeds into a gain stage that uses a cascoded architecture to achieve the extremely high open-loop gain of 120 dB minimum. This high gain is essential for precision applications, as it ensures that the closed-loop gain closely approaches the ideal value set by the external resistor ratio. The output stage is a class AB push-pull amplifier that can drive moderate loads while maintaining linearity. The rail-to-rail capability of the output is limited – the output can swing to within about 1.5V of the supply rails with a 10k ohm load – which is typical for high-voltage precision amplifiers that prioritize accuracy over maximum output swing. The high CMRR of 120 dB minimum is achieved through the matched input pair and careful layout, ensuring that common-mode noise and interference are rejected effectively. Similarly, the high PSRR of 120 dB means that variations in the power supply voltage have minimal effect on the output, which is important for precision circuits in noisy environments. The unity-gain stability with large capacitive loads (over 1000 pF) is achieved through internal frequency compensation that is optimized for both stability and bandwidth. Unlike zero-drift or chopper-stabilized amplifiers that periodically measure and correct offset (introducing switching artifacts and current noise), the ADA4077 achieves its low offset and drift through conventional precision design combined with trimming, resulting in continuous-time operation without switching artifacts. This makes it particularly suitable for applications where any discontinuities or transients in the output would be problematic, such as precision audio, sensor signal conditioning, and data acquisition frontends.

Pin No. Name Description
1 OUT A Output of amplifier A
2 -IN A Inverting input of amplifier A
3 +IN A Non-inverting input of amplifier A
4 V+ Positive supply voltage – connect to plus VCC (plus 2.5V to plus 15V)
5 +IN B Non-inverting input of amplifier B
6 -IN B Inverting input of amplifier B
7 OUT B Output of amplifier B
8 OUT C Output of amplifier C
9 -IN C Inverting input of amplifier C
10 +IN C Non-inverting input of amplifier C
11 V- Negative supply voltage – connect to minus VCC (minus 2.5V to minus 15V)
12 +IN D Non-inverting input of amplifier D
13 -IN D Inverting input of amplifier D
14 OUT D Output of amplifier D
  • Process control front-end amplifiers for industrial 4-20mA and PLC systems
  • Precision sensor signal conditioning: thermocouples, RTDs, strain gauges, load cells
  • Optical network control circuits and precision laser diode power control
  • High-precision instrumentation amplifiers and difference amplifiers
  • Precision active filters: low-pass, band-pass, Sallen-Key, state-variable
  • Voltage and current reference buffering and precision level setting
  • Data acquisition system frontends and signal conditioning chains
  • Laboratory and test equipment precision analog circuitry
  • Medical instrumentation requiring high accuracy and stability
  • Precision current sources and voltage sources
Model Manufacturer Key Difference
ADA4077-4ARUZ Analog Devices Same performance, 14-lead TSSOP package, smaller footprint
ADA4077-2ARZ Analog Devices Dual version, 8-SOIC, B-grade available (25uV offset max)
OP4177 ADI / Analog Devices Previous generation quad precision op-amp, pin-compatible, ADA4077 is upgrade
OPA4171 Texas Instruments Quad low-offset precision op-amp, similar specs, TI alternative
LTC2054 ADI / Linear Tech Quad zero-drift op-amp, lower offset/drift but with chopper artifacts
Recommend Parts
Dual N-channel MOSFET, 20V VDS, 7A ID, 26mΩ RDS(on) @ 4.5V, trench tech, low gate charge 15.2nC, logic-level drive, SOIC-8, AOS AO9926A.

Package:

SOIC-8 / SOP-8

In stock:

25000pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
Low-power 4ADC/2DAC audio codec with DSP, 38us analog-to-analog latency, 102dB/107dB SNR, ANC headsets, ASRC, PDM I/O, self-boot, 40-LFCSP 6x6mm, ADI SigmaDSP.

Package:

40-Lead LFCSP (6mm x 6mm, EP)

In stock:

4280pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
SigmaDSP 28/56-bit audio processor with 2x ADC + 4x DAC, 50 MIPS, 192kHz, self-boot from EEPROM, I2C/SPI control, 48-LQFP, ADI ADAU1701 series.

Package:

48-Lead LQFP (7mm x 7mm)

In stock:

3860pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
Precision quad micro-power CMOS op-amp, 50uV offset, 1pA bias current, 22nV/rootHz noise, 1.8-5V single supply, rail-to-rail I/O, 400kHz GBP, 14-TSSOP, ADI.

Package:

14-Lead TSSOP

In stock:

8920pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
Marvell Avastar 88W8782 single-chip WLAN SoC, 802.11a/b/g/n dual-band, 1×1 SISO, 150Mbps, integrated PA/LNA/CPU, SDIO/SPI/USB host interface, QFN package.

Brand:

Package:

QFN / TFBGA

In stock:

3120pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
N-channel JFET low-noise audio transistor, 40V VGDS, 6-12mA IDSS (BL grade), 22mS transconductance, 0.5dB noise figure, TO-92, for phono preamps and MC head amplifiers.

Brand:

Package:

TO-92

In stock:

7840pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
Quality Assurance

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • Automotive Electronics: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • Medical Devices: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

Contact Us

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@ic-vendor.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

Shipping & Payment

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.
  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@ic-vendor.com

Tel / WhatsApp: +86 13760382860

Service & Packaging

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@ic-vendor.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.