Image for reference only
EP1K100QC208-3N
208-pin PQFP
EP1K100QC208-3N is an Intel/Altera ACEX 1K100 FPGA, 100K gates, 4,992 LEs, 208-pin PQFP, speed grade -3.
| Type | ACEX 1K FPGA |
| Gates | 100,000 |
| Logic Elements | 4,992 LEs |
| Embedded RAM | 49,152 bits |
| Package | 208-pin PQFP (Q208) |
| Speed Grade | -3 |
| Series | EP1K100 |
Refer to manufacturer datasheet for detailed application information and design guidelines.
EP1K100QC208-3N is an Intel/Altera ACEX 1K100 FPGA, 100K gates, 4,992 LEs, 208-pin PQFP, speed grade -3.
The EP1K100QC208-3N is a ACEX 1K FPGA from Intel/Altera. It uses a lookup table (LUT)-based fabric with configurable logic elements (LEs) that implement combinatorial and sequential logic. Embedded M9K/M4K memory blocks provide on-chip RAM, ROM, and FIFO functions. Dedicated DSP multipliers accelerate arithmetic operations. A programmable interconnect matrix routes signals between logic, memory, and I/O elements. Configuration is loaded from external flash or via JTAG/AS programming. The device supports multiple I/O standards including LVDS, SSTL, and HSTL for interfacing with diverse external devices.
| Pin Group | Name | Description |
|---|---|---|
| I/O | GPIO Banks | Programmable I/O with multiple standard support (LVDS, SSTL, HSTL, LVCMOS) |
| Power | VCCIO, VCCINT, VCCPLL | Core, I/O, and PLL supply voltages |
| Ground | GND | Ground reference |
| Config | DATA, DCLK, nCSO | JTAG/AS/AP configuration interface |
| Clock | CLK, PLL | Dedicated clock inputs and PLL feedback |
| Transceiver | TX/RX (if applicable) | High-speed serial transceiver lanes |
| Model | Manufacturer | Key Difference |
|---|---|---|
| XC7K325T | Xilinx | Kintex-7, 326K LE, Artix-class performance |
| ECP5-85 | Lattice | 84K LUT, low-cost mid-range alternative |
| iCE40HX8K | Lattice | 8K LUT, ultra-low-cost small form factor |
Brand:
Package:
In stock:
Cargo cycle: 3~7 Days
The minimum order is 1
Brand:
Package:
In stock:
Cargo cycle: 3~7 Days
The minimum order is 1
Brand:
Package:
In stock:
Cargo cycle: 3~7 Days
The minimum order is 1
Brand:
Package:
In stock:
Cargo cycle: 3~7 Days
The minimum order is 1
Brand:
Package:
In stock:
Cargo cycle: 3~7 Days
The minimum order is 1
Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.
If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:
Email: [email protected]
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.
Settlement Currency
US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.
Bank Charges
All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.
Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.
MOQ & Sample Service
We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.
Packaging Standard
All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.
Import Duties & Taxes
All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.
Email: [email protected]
Tel / WhatsApp: +86 13760382860
Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.
Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.
