Product Overview
The AS1138 is a single-chip, highly integrated CMOS solution for Power over Ethernet (PoE) Powered Devices (PD) requiring input power of up to 30 Watts. Manufactured by Akros Silicon, the AS1138 fully supports both IEEE 802.3af-2005 (Type 1, 13W) and IEEE 802.3at-2009 (Type 2, 25.5W/30W) power requirements. The device integrates a complete PoE PD interface — including detection signature, classification, inrush current control, over-current protection, and integrated surge protection — along with a flexible current-mode DC-DC controller that can be configured for flyback, forward, or buck topologies. The AS1138 features robust 2-event classification detection with proprietary digital filtering to prevent false Type 2 PSE detection from line noise. On-chip surge protection provides faster response to surge events and minimizes stray surge current through sensitive circuits such as the Ethernet PHY. The DC-DC controller offers a wide programmable switching frequency range from 80kHz to 500kHz with an external resistor, supporting various power supply design requirements. The AS1138 is ideal for VoIP phones, wireless access points, IP cameras, and other high-power PoE applications.
Key Specifications
| Parameter | Conditions | Min | Typ | Max | Unit |
| PoE Standard | IEEE 802.3af / 802.3at | ||||
| PD Type | Type 1 (13W) & Type 2 (30W) | ||||
| Input Voltage Range | Operating (Type 1) | 37 | 48 | 57 | V |
| Input Voltage Range | Operating (Type 2) | 42.5 | 48 | 57 | V |
| UVLO Rising Threshold | 37 | 38 | 42 | V | |
| UVLO Falling Threshold | 30 | 32 | 34 | V | |
| Detection Signature Voltage | Max | 10.1 | 12.5 | 13 | V |
| Classification Voltage Range | 14.5 | 22 | 20.5 to 24 | V | |
| Mark Event Voltage Range | 6.9 | 12.5 | 13 | V | |
| Mark Event Current | 0.25 | 4 | mA | ||
| Inrush Current (Type 1) | 50 | 150 | 200 | mA | |
| Inrush Current (Type 2) | 100 | 295 | 350 | mA | |
| Operating Current Limit (Type 1) | 350 | 400 | 500 | mA | |
| Operating Current Limit (Type 2) | 720 | 800 | 925 | mA | |
| Switch On Resistance | 350mA | 0.8 | 1 | Ω | |
| DC-DC Controller Type | Current-mode PWM | ||||
| Switching Frequency | Programmable | 80 | 100/225/350 | 500 | kHz |
| Topology Support | Flyback, Forward, Buck | ||||
| 2-Event Classification | Yes, with digital filtering | ||||
| AT Detection Output | ATDET pin, Type 2 PSE detected | ||||
| Surge Protection | On-chip | Integrated surge clamp | |||
| System ESD (RJ-45) | IEC 61000-4-2 | 8kV contact / 15kV air | |||
| High-Voltage Pins | Steady-state | 80 | V | ||
| Low-Voltage Pins | 6 | V | |||
| 5V Regulator Output | VDD5 pin, 5V output | ||||
| Operating Temperature | -40 | +85 | °C | ||
| Junction Temperature | Max | 150 | °C | ||
| Package | SOIC-20 / SOP-20 | ||||
Features
- Full IEEE 802.3af-2005 and 802.3at-2009 compliance
- Supports both Type 1 (13W) and Type 2 (30W) PD modes
- 2-event classification for 802.3at higher power PDs
- Robust Type 2 PSE detector with proprietary digital filtering
- Eliminates false positives from line noise transients
- Programmable classification current via external resistor
- Class 0 through Class 4 support
- Integrated inrush current control
- Integrated over-current protection
- Integrated surge protection (IEC 61000-4-2/3/4/5/6)
- 8kV contact / 15kV air system-level ESD at RJ-45
- Integrated current-mode DC-DC controller
- Programmable switching frequency: 80kHz to 500kHz
- Supports flyback, forward, and buck topologies
- Low component count and minimal BOM cost
- Small form factor design
- Internal 5V LDO regulator output
- ATDET pin indicates Type 2 PSE connection
Applications
- VoIP phones and IP phones
- Wireless access points (WAP)
- IP cameras and security cameras
- IP-based PTZ cameras
- Powered speakers and IP audio devices
- Industrial Ethernet devices
- PoE lighting systems
- Point of Sale (POS) terminals
- Network switches with PoE PD ports
- Thin clients and zero clients
- Access control and door entry systems
- RFID readers