Product Overview
The AT89S51 is a low-power, high-performance CMOS 8-bit microcontroller from Atmel (now Microchip) featuring 4KB of In-System Programmable (ISP) Flash memory. As an enhanced successor to the classic AT89C51, the AT89S51 maintains full compatibility with the 80C51 instruction set and pinout while adding significant improvements including serial ISP programming, a watchdog timer, dual data pointers, and a power-off flag. The device integrates 128 bytes of internal RAM, 32 general-purpose I/O lines, two 16-bit timer/counters, a full-duplex UART serial port, and six interrupt sources with two priority levels. With a maximum operating frequency of 33MHz, the AT89S51 delivers approximately 3 MIPS of throughput. The ISP feature allows programming the Flash memory in-circuit via a simple SPI-compatible serial interface (MOSI/MISO/SCK on Port 1 pins 5/6/7), eliminating the need for a separate high-voltage parallel programmer. The device supports low-power Idle and Power-down modes, with Power-down mode supporting interrupt recovery. The AT89S51 is available in PDIP-40, TQFP-44, and PLCC-44 packages, making it suitable for both through-hole prototyping and surface-mount production. This device is still in production status and is widely used in cost-sensitive embedded control applications.
Key Specifications
| Parameter | Conditions | Min | Typ | Max | Unit |
| Core Architecture | 8-bit 80C51 (MCS-51 compatible) | ||||
| Operating Voltage (VCC) | 4.0 | 5.0 | 5.5 | V | |
| Clock Frequency | 0 Hz to max | 0 | 33 | MHz | |
| Flash Program Memory | In-System Programmable | 4 KB (4096 bytes) | |||
| Flash Endurance | Write/Erase cycles | 1000 | cycles | ||
| Flash Data Retention | 10 | years | |||
| Internal RAM | 128 x 8-bit (128 bytes) | ||||
| External Memory | Code + Data | 64KB each (addressable) | |||
| Program Memory Lock | 3-level lock bits | ||||
| I/O Pins | 4 ports x 8 bits | 32 programmable I/O lines | |||
| Timer/Counter 0 | 16-bit | 16-bit Timer/Counter (4 modes) | |||
| Timer/Counter 1 | 16-bit | 16-bit Timer/Counter (4 modes) | |||
| Total Timers | Two 16-bit timer/counters | ||||
| Serial Port (UART) | Full duplex | 1 UART (Mode 0/1/2/3) | |||
| Interrupt Sources | 6 interrupt sources, 2 priority levels | ||||
| Watchdog Timer (WDT) | Yes, built-in | ||||
| Dual Data Pointer | Yes (DPTR0, DPTR1) | ||||
| Power-off Flag | Yes (POF flag) | ||||
| In-System Programming (ISP) | Serial via SPI pins | Yes (MOSI/MISO/SCK on P1.5/6/7) | |||
| ISP Mode | Byte mode and Page mode | ||||
| Oscillator | External crystal / RC oscillator | ||||
| Idle Mode Current | mA | ||||
| Power-down Mode Current | μA | ||||
| Power-down Recovery | Interrupt and hardware reset wake-up | ||||
| Operating Temperature | -40 | +85 | °C | ||
| Package | PDIP-40, TQFP-44, PLCC-44 | ||||
Features
- Compatible with MCS-51 (80C51) products – instruction set and pinout
- 4KB bytes of In-System Programmable (ISP) Flash memory
- 1,000 write/erase cycles endurance
- 128 x 8-bit internal RAM
- Three-level program memory lock
- 32 programmable I/O lines
- Two 16-bit timer/counters (T0, T1)
- Six interrupt sources with two priority levels
- Full-duplex UART serial channel
- Watchdog Timer (WDT) with on-chip oscillator
- Dual Data Pointer (DPTR0, DPTR1) for efficient memory access
- Power-off Flag (POF) for brown-out detection
- Interrupt recovery from Power-down mode
- Fully static operation: 0 Hz to 33 MHz
- Low-power Idle and Power-down modes
- On-chip oscillator and clock circuitry
- Fast programming time
- Flexible ISP programming (byte and page mode)
- ISP interface on P1.5 (MOSI), P1.6 (MISO), P1.7 (SCK)
- Available in PDIP-40, TQFP-44, PLCC-44 packages
- Industrial temperature range (-40 to +85°C)
Applications
- Embedded control systems
- Industrial automation
- Consumer electronics
- Home appliances
- IoT and smart sensors
- LED lighting control
- Motor control
- Security systems
- Development boards and education
- Battery chargers
- Toys and games
- Power supply controllers