Product Overview
The AT91SAM7S256D-AU is a 32-bit microcontroller from Atmel (now Microchip) based on the ARM7TDMI processor core, featuring 256KB of high-speed internal Flash memory and 64KB of SRAM. Part of the AT91SAM7S series, this device delivers high performance with a maximum operating frequency of 55MHz, achieving up to 55 MIPS of throughput. The integrated high-speed Flash supports single-cycle access at up to 30MHz, with a prefetch buffer optimizing Thumb instruction execution at maximum frequency. The SAM7S256 includes a rich set of peripherals including a USB 2.0 Full-Speed device port, one USART, an SPI, an SSC (Synchronous Serial Controller), a TWI (I2C-compatible), an 8-channel 10-bit ADC, a 3-channel 16-bit Timer Counter, a 4-channel PWM controller, and a Peripheral DMA Controller (PDC) for efficient data transfer without CPU intervention. The Advanced Interrupt Controller (AIC) provides individually maskable, eight-level priority vectored interrupts. The device also includes a Power Management Controller (PMC) with software-controlled power optimization, a Reset Controller with brown-out detection, and a real-time timer. Operating from a 1.65V to 1.95V core supply with 3.3V I/O, the AT91SAM7S256D-AU is packaged in a 64-lead LQFP and is suitable for a wide range of embedded applications including industrial control, consumer products, and USB-connected devices.
Key Specifications
| Parameter | Conditions | Min | Typ | Max | Unit |
| Core Processor | ARM7TDMI (ARM Thumb) | ||||
| Core Architecture | 32-bit RISC (16-bit Thumb instruction set) | ||||
| Maximum Clock Frequency | 55 | MHz | |||
| Maximum Throughput | 55 | MIPS | |||
| Program Flash Memory | Single plane, 256-byte pages | 256 KB | |||
| Flash Pages | 1024 pages of 256 bytes | 1024 pages | |||
| Flash Access Time | Single cycle access | 30 | MHz | ||
| Flash Programming | Page program + auto-erase | 6 | ms | ||
| Full Chip Erase | 15 | ms | |||
| Flash Endurance | Write/erase cycles | 10000 | cycles | ||
| Data Retention | 10 | years | |||
| Flash Security | Security bit + 16 sector lock bits | ||||
| Internal SRAM | Single-cycle access | 64 KB | |||
| Prefetch Buffer | Thumb instruction optimization | Yes | |||
| Core Supply Voltage (VDDCORE) | 1.65 | 1.8 | 1.95 | V | |
| I/O Supply Voltage (VDDIO) | 3.3 | V | |||
| General Purpose I/O | PIOA | 32 I/O lines | |||
| USART | 1 (USART0) | ||||
| Debug UART (DBGU) | 1 (2-wire) | ||||
| SPI | Master/Slave | 1 (with 4 chip selects) | |||
| SSC (Synchronous Serial) | 1 (I2S/AC97 compatible) | ||||
| TWI (Two-Wire) | I2C compatible | 1 | |||
| USB 2.0 Device | Full Speed (12Mbps) | Yes | |||
| Timer/Counter Channels | 16-bit | 3 channels (TC0) | |||
| PWM Channels | 4 channels (PWM0-PWM3) | ||||
| ADC Resolution | 10-bit | ||||
| ADC Channels | 8 channels | ||||
| Peripheral DMA Controller | Yes (PDC) | ||||
| Advanced Interrupt Controller | 8-level priority | Yes (AIC) | |||
| Reset Controller | POR + BOD | Yes (RSTC) | |||
| Power Management | Yes (PMC with PLL) | ||||
| Real-time Timer (RTT) | 32-bit + alarm | Yes | |||
| Periodic Interval Timer | 20-bit + 12-bit | Yes (PIT) | |||
| Watchdog Timer | Windowed, 12-bit | Yes (WDT) | |||
| JTAG Debug Interface | EmbeddedICE | Yes | |||
| Operating Temperature | Industrial | -40 | +85 | °C | |
| Package | LQFP-64 (10x10mm), 0.5mm pitch | ||||
Features
- ARM7TDMI 32-bit RISC processor with Thumb instruction set
- High performance: up to 55 MIPS at 55 MHz
- 256KB high-speed internal Flash memory (single cycle up to 30MHz)
- 64KB high-speed internal SRAM (single-cycle access)
- Prefetch buffer for optimized Thumb execution
- 10,000 Flash write cycles, 10-year data retention
- Flash security: security bit + 16 sector lock bits
- Embedded In-Circuit Emulator (EmbeddedICE)
- 32 programmable I/O lines with input change interrupt
- 1 USART + 1 Debug UART (DBGU)
- SPI with 4 chip selects, Master/Slave
- SSC (Synchronous Serial Controller) – I2S/AC97 compatible
- TWI (Two-Wire Interface, I2C compatible)
- USB 2.0 Full-Speed Device port
- 3-channel 16-bit Timer/Counter
- 4-channel PWM controller
- 8-channel 10-bit ADC
- Peripheral DMA Controller (PDC) for all serial peripherals
- Advanced Interrupt Controller (AIC) with 8-level priority
- Power Management Controller (PMC) with PLL
- Reset Controller with POR and brown-out detector
- Real-time Timer (RTT) and Periodic Interval Timer (PIT)
- Windowed Watchdog Timer
- Power supply: 1.65V-1.95V core, 3.3V I/O
- Low power modes: Idle, Slow Clock, Standby
- SAM-BA bootloader for in-system programming
- LQFP-64 (10x10mm) package
- Industrial temperature range (-40 to +85°C)
Applications
- Industrial control and automation
- USB-connected peripherals
- Data acquisition and logging systems
- Motor control and drive systems
- Test and measurement equipment
- Consumer electronics
- Medical devices
- Point-of-sale terminals
- Networking and communication equipment
- Security systems
- Robotics
- Automotive aftermarket