AT73C246


PMU + stereo audio codec, 2x DCDC buck (600mA), 4x LDO, 100dB DAC, 96dB ADC, 60mW headphone amp, I2S/TWI, RTC, 10-bit ADC, QFN-64, Atmel AT73C246.

1800

Effective Inventory
Go to Inquiry

Image for reference only

Manufacturer Part:

AT73C246

Package:

QFN-64 (7.5x7.5x0.9mm)

Other recommendations you may be interested in.
Description

Product Overview

The AT73C246 is a highly integrated Power Management Unit (PMU) with stereo audio codec from Atmel (now Microchip), specifically designed for advanced application processors and multimedia systems requiring complex low-voltage power supplies and high-quality audio. The device integrates two high-efficiency DC-DC buck converters and four low-noise LDO regulators, providing precisely calibrated voltage rails for MCU cores, I/O, memory, and analog/RF sections. The integrated stereo audio codec features a 96dB dynamic range stereo ADC and a 100dB dynamic range stereo DAC, with a 60mW stereo headphone amplifier capable of directly driving 16Ω/32Ω headphones. The audio section supports multiple input sources including two microphones, line-in, and auxiliary input, with bypass/sidetone modes for low-power analog audio paths. Additional features include a real-time clock (RTC) with backup battery charger, a 10-bit SAR ADC with multiplexed inputs for voltage monitoring, and flexible power management with standby mode and wake-up functionality. Controlled via a two-wire interface (TWI/I2C) for PMU and I2S for digital audio, the AT73C246 is ideally suited for Atmel AT91SAM9 and AT91CAP9 ARM9-based multimedia systems, significantly reducing BOM cost and board space compared to discrete solutions.

Key Specifications

Parameter Conditions Min Typ Max Unit
Input Voltage Range (VIN) 2.9 5.5 V
DC-DC Buck 0 (BUCK0) CORE+MEM 0.8 1.8 3.6 V
BUCK0 Output Current 600 mA
DC-DC Buck 1 (BUCK1) CORE 0.8 1.2 3.6 V
BUCK1 Output Current 600 mA
LDO2 Output CORE, 50mV steps 0.8 1.0 1.9 V
LDO2 Output Current 300 mA
LDO3 Output I/O, 50mV steps 2.7 3.3 3.6 V
LDO3 Output Current 200 mA
LDO4 Output AUDIO CODEC, 50mV steps 2.7 3.3 3.6 V
LDO4 Output Current 200 mA
LDO5 (Backup) Output RTC supply 2.5 V
LDO5 Output Current 10 mA
Backup Battery Charger Rechargeable coin cell Integrated
Switching Frequency DCDC converters 1800 2000 2200 kHz
OFF Mode Current RTC running 20 40 μA
RUN Mode Current All DCDC + LDO on 7 15 mA
STANDBY Mode Current 310 500 μA
Audio DAC Dynamic Range 100 dB
Audio ADC Dynamic Range 96 dB
Headphone Output Power 16Ω load 60 mW
Audio Sampling Rates 8 to 96 kHz (9 rates)
Audio Interface I2S (Master/Slave)
Control Interface TWI (I2C compatible)
SAR ADC 10-bit, 300kS/s 4 ext + 6 int channels
ADC Resolution 10-bit
RTC Crystal Oscillator 32.768kHz <1 μA
Wake-up Inputs 4 wake-up pins + RTC alarm
Reset Generator POR + BOD + External reset
Embedded LDO VPAD output 3.3 V
Operating Temperature -40 +85 °C
Package QFN-64 (7.5 x 7.5 x 0.9mm), exposed pad

Features

  • Highly integrated PMU + stereo audio codec in single chip
  • 2.9V to 5.5V wide input voltage range
  • Two high-efficiency DC-DC buck converters (0.8-3.6V, 600mA each)
  • Four low-noise LDO regulators with 50mV voltage steps
  • Backup battery charger and RTC supply LDO (2.5V, 10mA)
  • Automatic voltage scaling (DVS) for power optimization
  • Fast transient response on all supply channels
  • Over-current protection and over-temperature detection
  • 100dB dynamic range stereo audio DAC
  • 96dB dynamic range stereo audio ADC
  • 60mW stereo headphone amplifier (capless option)
  • Multiple audio inputs: 2x mic, line-in, aux-in
  • Analog bypass and sidetone modes for low power
  • I2S digital audio interface (Master/Slave)
  • TWI (I2C) control interface
  • 10-bit SAR ADC with 10-channel multiplexer
  • Low-power RTC with programmable alarm wake-up
  • Flexible standby and power-down modes
  • 20μA typical OFF mode current
  • QFN-64 7.5×7.5mm compact package
  • Reduces board space by 30% vs discrete solutions

Applications

  • Portable media players and MP3 players
  • Smartphones and handheld devices
  • ARM9-based multimedia systems (AT91SAM9, AT91CAP9)
  • Portable navigation devices
  • Digital cameras and camcorders
  • Wireless audio and Bluetooth speakers
  • Tablet PCs and eBook readers
  • Portable medical devices
  • Industrial handheld terminals
  • Battery-powered multimedia devices

The AT73C246 is a highly integrated Power Management Unit (PMU) with stereo audio codec from Atmel (now Microchip Technology), designed to provide a complete power and audio solution for advanced application processor-based multimedia systems. The device integrates two high-efficiency DC-DC buck converters (BUCK0 and BUCK1) each delivering up to 600mA with output voltages programmable from 0.8V to 3.6V in 50mV steps, ideal for powering MCU cores and DDR memory. Additionally, four low-noise LDO regulators provide clean power for I/O interfaces, audio codec circuits, and analog/RF sections. A dedicated backup LDO (2.5V, 10mA) with rechargeable backup battery support and RTC function ensures timekeeping during power loss. The integrated stereo audio codec delivers exceptional audio quality with a 100dB dynamic range DAC and 96dB dynamic range ADC, supporting sampling rates from 8kHz to 96kHz. The 60mW headphone amplifier can directly drive 16Ω/32Ω headphones with a capless option that eliminates the need for large coupling capacitors. Multiple audio inputs including dual microphones, line-in, and auxiliary input are supported, with analog bypass and sidetone modes for low-power operation. A 10-bit SAR ADC with 10 multiplexed channels (4 external, 6 internal) enables voltage monitoring and measurement functions. The AT73C246 is controlled via a TWI (I2C) interface for power management and I2S interface for digital audio. With its high level of integration, the device reduces system BOM cost, board space, and power consumption while enhancing audio quality. Packaged in a compact QFN-64 (7.5×7.5mm), the AT73C246 is perfectly suited for Atmel AT91SAM9 and AT91CAP9 ARM9-based systems and other portable multimedia applications.

The AT73C246 operates as a complete power management and audio subsystem, receiving a single input voltage from 2.9V to 5.5V and generating multiple regulated output rails while providing high-quality audio input/output. The power management unit (PMU) consists of two synchronous buck DC-DC converters operating at approximately 2MHz switching frequency, providing high efficiency conversion for high-current loads like MCU cores and memory. These buck converters feature automatic voltage scaling (DVS) capability that allows software to dynamically adjust output voltages for power optimization. Four low-dropout (LDO) regulators provide clean, low-noise supplies for sensitive analog circuits, I/O interfaces, and the audio codec. LDO5 is dedicated to RTC and backup battery charging, maintaining real-time clock operation and providing wake-up capability even in OFF mode (20μA typical current). The audio codec section operates independently, receiving digital audio via the I2S interface and converting it through a high-quality DAC before amplification by the headphone driver. On the input side, multiple analog sources (microphones, line-in, aux-in) are multiplexed into the stereo ADC for digital conversion. Bypass and sidetone modes allow direct analog paths from input to output, reducing power consumption when digital processing is not needed. The 10-bit SAR ADC with analog multiplexer provides voltage monitoring capability for system diagnostics. The entire device is configured and controlled through the TWI (I2C) serial interface, with flexible power state management including RUN, STANDBY, and OFF modes.

The AT73C246 is available in a 64-pin QFN package (7.5×7.5×0.9mm) with exposed pad. Major pin groups include:

Pin Group Description
Power Input Pins VINSYS (main input 2.9-5.5V), VIN0/VIN1 (buck inputs), VIN2-VIN4 (LDO inputs), AGND, DGND, GNDSYS, GND0/GND1 (power ground)
DC-DC Buck 0 SW0 (switch node), VFB0 (feedback)
DC-DC Buck 1 SW1 (switch node), VFB1 (feedback)
LDO Outputs VDD2 (LDO2, 1V/300mA), VDD3 (LDO3, 3.3V/200mA I/O), VDD4 (LDO4, 3.3V/200mA audio), VBACKUP (LDO5, 2.5V/10mA RTC)
Audio Inputs MICL/MICR (microphone left/right), LINL/LINR (line in left/right), AUXL/AUXR (auxiliary left/right)
Audio Outputs HPL/HPR (headphone left/right), HPVCM (headphone VCM buffer)
Digital Audio MCLK (master clock), LRFS (frame sync), BCLK (bit clock), DAI (data in), DAO (data out) – I2S interface
Control Interface TWD (TWI data), TWCK (TWI clock) – I2C compatible
RTC / Clock XIN, XOUT (32.768kHz crystal)
Reset / Interrupt RSTB (reset), ITB (interrupt output), HRST (hard reset)
Wake-up Inputs WAKEUP0, WAKEUP1, WAKEUP2, WAKEUP3
ADC Inputs ANA0, ANA1, ANA2, ANA3 (auxiliary analog inputs)
Reference / Bias VBG (bandgap), REXT (bias resistor), MICBIAS (mic bias)
VPAD 3.3V pad supply output from embedded LDO
Exposed Pad Must be soldered to GND for thermal and electrical performance
  • Portable media players and digital audio players
  • Smartphones and feature phones
  • ARM9-based multimedia systems (AT91SAM9, AT91CAP9)
  • Portable GPS and navigation devices
  • Digital cameras and camcorders
  • Tablet PCs and eBook readers
  • Bluetooth speakers and wireless audio devices
  • Portable medical instruments
  • Industrial handheld terminals
  • Wearable multimedia devices
Model Manufacturer Key Difference
AT73C213 Atmel Simpler audio codec, fewer power channels
AT73C240 Atmel Audio codec + PMU, different feature set
WM8994 Cirrus Logic Audio codec with integrated class W headphone amp
ACT8846 Active-Semi Multi-channel PMIC for application processors
TPS65053 Texas Instruments PMIC with 2 DCDC + 3 LDO
Recommend Parts
8-bit AVR MCU, 128KB Flash, 4KB SRAM, 4KB EEPROM, 53 I/O, 16MHz/16MIPS, 4 timers, 2 USARTs, 8-ch 10-bit ADC, JTAG debug, QFN-64/MLF, Atmel ATMEGA128A-MU.

Package:

QFN-64 / MLF-64 (9x9x1.0mm, 5.4mm EP)

In stock:

4500pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
8-bit AVR MCU, 128KB Flash, 8KB SRAM, 4KB EEPROM, 86 I/O, 16MHz/16MIPS, 6 timers, 4 USARTs, 16-ch 10-bit ADC, JTAG debug, TQFP-100, Atmel ATMEGA1280-16AU, Arduino Mega.

Package:

TQFP-100 (14x14mm)

In stock:

3200pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
ARM7TDMI 32-bit MCU, 256KB Flash, 64KB SRAM, 55MHz/55MIPS, 10-bit ADC x 8ch, USB FS, USART, SPI, SSC, TWI, PWM x 4ch, PDC, AIC, LQFP-64, Atmel AT91SAM7S256D-AU.

Package:

LQFP-64 (10x10mm)

In stock:

2800pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
8-bit 8051 MCU, 4KB ISP Flash, 128B RAM, 32 I/O, 2 timers, UART, watchdog timer, dual DPTR, 33MHz, ISP programming, PDIP-40, Atmel AT89S51.

Package:

PDIP-40 / TQFP-44 / PLCC-44

In stock:

15000pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
8-bit 8051 MCU, 8KB Flash, 256B RAM, 32 I/O, 3 timers/counters, UART, 20MHz, PDIP-40 through-hole, Atmel AT89C52-20PC, NRND use AT89S52.

Package:

PDIP-40 / DIP-40 (through-hole)

In stock:

8500pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
30W PoE PD + DC-DC controller, IEEE 802.3af/at Type1/Type2, 2-event classification, integrated surge protection, current-mode PWM, 80-500kHz, flyback/forward/buck, Akros Silicon AS1138.

Brand:

Package:

SOIC-20 / SOP-20

In stock:

2800pcs

Cargo cycle: 3~7 Days
The minimum order is 1

Go to Inquiry
Quality Assurance

Quality is the core foundation of our long-term global cooperation. With over 20 years of experience in the electronic component industry, Materialparts has built a strict and standardized quality management system covering component sourcing, incoming inspection, full-batch testing, packaging and delivery. We are committed to delivering 100% genuine, high-reliability electronic components for industrial control, automotive electronics, consumer electronics and medical device industries, and fully safeguarding your production and R&D projects.

1. Authorized & Genuine Sourcing Promise

All of our electronic components are procured from official authorized distributors and original manufacturers. We strictly reject counterfeits, refurbished parts, disassembled components and gray-market goods. Every product is guaranteed to be brand-new original parts and fully consistent with the original technical parameters. For branded products such as NXP IC series, we maintain complete supply channel documents to realize full product traceability.

2. Strict Full-batch Quality Inspection

We implement 100% full-batch quality control for all goods before shipment. Our professional QC team conducts multi-dimensional tests including appearance inspection, electrical parameter testing, performance verification and packaging check. Each batch of components is attached with complete inspection reports and batch records. We stick to zero-tolerance standards for defective products to ensure every piece of component meets industrial application requirements.

3. Industry Standard Compliance

Our products comply with a variety of international industry quality standards to adapt to high-standard application scenarios:
  • Automotive Electronics: All automotive-grade components pass AEC-Q series certification, featuring excellent stability and durability to adapt to complex vehicle operating environments.
  • Medical Devices: High-reliability components meet medical industry safety and compliance regulations, ensuring stable operation for medical equipment.
  • Industrial Control & Consumer Electronics: Products conform to universal international electronic industry standards, suitable for long-term continuous operation of various equipment.

4. Professional Reliability Control

For static-sensitive, moisture-sensitive and precision components such as ICs, PCBs, sensors and connectors, we carry out reliability screening in advance. Combined with standardized ESD anti-static packaging and vacuum moisture-proof packaging, we avoid component damage caused by static electricity, dampness or collision during storage and transportation, and retain the original performance of products.

5. Traceability Management System

We establish a complete product traceability system. Each batch of goods corresponds to independent batch number, sourcing record, inspection record and delivery record. Customers can query the whole lifecycle information of components at any time. This system effectively solves quality risks and facilitates after-sales handling and production quality control for your company.

6. After-sales Quality Guarantee

If any product is confirmed to have non-conformity quality problems due to our reasons after receipt, we provide free return, exchange and supplementary delivery services. Our professional quality team will also conduct root cause analysis to optimize our quality control process. We respond to quality feedback within 24 hours to resolve your worries efficiently.

Contact Us

If you have inquiries about our quality standards, inspection procedures or product certification documents, please feel free to contact us:

 

Email: info@ic-vendor.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China

 

Shipping & Payment

Materialparts is a professional global supplier of electronic components with over 20 years of industry experience. We provide one-stop supply of passive components, integrated circuits, as well as parts for industrial control, automotive electronics, consumer electronics and medical devices. Below are the unified shipping and payment policies applicable to all orders, samples and bulk purchases worldwide.

1. Payment Terms

We offer a variety of secure and convenient payment methods to meet diverse business cooperation needs. Details are as follows:
  1. Accepted Payment Methods
  • T/T (Bank Wire Transfer): The primary settlement method for bulk orders and a widely used international payment channel.
  • PayPal: Ideal for small orders, sample orders and quick payments.
  1. Settlement Currency

     

    US Dollar (USD) is the default settlement currency. RMB is available for domestic customers.

  2. Bank Charges

     

    All transfer fees, intermediary bank charges and other remittance-related expenses shall be borne by the buyer.

  3. Payment Requirements
  • Sample and small orders: Shipment will be arranged upon full payment.
  • In-stock bulk orders: Goods will be delivered within 2 to 3 working days after full payment.

2. Shipping & Delivery

We partner with leading global logistics providers to ensure safe and fast delivery worldwide. Relevant details are listed below:
  1. Logistics Partners
  • International Express: DHL, FedEx, UPS, TNT
  • Economy Logistics: Air freight and sea freight for large-volume cargo
  • Domestic Delivery: SF Express, Yunda Express
  1. Order Processing Time
  • In-stock items: Orders confirmed and fully paid before 14:00 (GMT+8) will be shipped on the same day. All other orders will be dispatched within 1 to 2 working days.
  • Out-of-stock or sourced items: The delivery lead time will be confirmed separately according to brand and inventory status.
  1. Estimated Transit Time
  • International Express: 3 – 7 working days globally
  • Air Freight: 7 – 12 working days
  • Sea Freight: 25 – 40 working days for heavy and large bulk cargo
  1. Shipping Fee Rules
  • Shipping cost is calculated based on package weight, volume, destination and delivery method.
  • Both freight prepaid and freight collect are available. Please provide your courier account number in advance if you choose freight collect.
  • Free international express delivery is offered for large orders. Terms for long-term partners can be negotiated separately.
  1. Shipment Tracking
     

    Within 24 hours after dispatch, we will send the tracking number, commercial invoice, packing list and other documents to your email or communication account. You may check the shipment status online in real time.

3. General Order Rules & Notes

  1. MOQ & Sample Service

     

    We support flexible minimum order quantities for samples, small-batch and large-batch orders. All sample orders shall comply with the above shipping and payment policies.

  2. Packaging Standard

     

    All electronic components are packed with professional anti-static and shockproof materials. Original factory packaging is available for branded chips and integrated circuits.

4. Customs & Liability Statement

  1. Import Duties & Taxes

     

    All import duties, customs clearance fees and local taxes incurred for international shipments shall be borne by the buyer. We will provide complete customs documents to assist you with clearance procedures.

  2. Handling of Lost or Damaged Goods
  • In case of loss or severe damage during transit, please contact us within 48 hours after receiving the tracking information. We will assist you in filing a claim with the logistics provider.
  • We shall not be liable for any losses caused by incorrect delivery address, wrong contact information or the buyer’s refusal to complete customs clearance.

5. Local Pickup in Shenzhen

Local pickup service is available for customers in Shenzhen and surrounding areas:
  • Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong Province, China
  • Business Hours: 09:00 – 18:00, Monday to Friday. Closed on weekends and official public holidays.
  • Notice: Please make an appointment via email or communication tools one day in advance, and present your order information upon pickup.

Contact Information

Email: info@ic-vendor.com

Tel / WhatsApp: +86 13760382860

Service & Packaging

Materialparts is a professional electronic component supplier based in Shenzhen, China, with over 20 years of global trading experience. We integrate component procurement, quality inspection, technical support, customized packaging, and global delivery services to provide one-stop supply chain solutions. Our business covers industrial control, automotive electronics, consumer electronics, medical devices and other industries. We always adhere to genuine sources, stable supply and considerate after-sales service.

Core Services

1. One-stop Sourcing & BOM Support

We specialize in a full range of passive and active electronic components, including SMD resistors, power resistors, connectors, aviation connectors, LED beads, flexible circuit boards, printed circuit boards, and integrated circuits. Our professional team provides BOM list consolidation, component matching, and alternative model recommendation services. We support sample orders, small-batch trial production, and mass production orders with flexible MOQs to meet diverse procurement needs.

2. Genuine Product Guarantee & Full-process Quality Inspection

All products are sourced from official authorized channels and are 100% original genuine parts. Every batch of goods undergoes strict full-process quality inspection before delivery, with complete batch records and traceability documents provided. Our products comply with AEC-Q standards for automotive electronics and high-reliability specifications for medical devices. We eliminate counterfeits, refurbished parts and defective products from the source to secure your project production.

3. Fast Quotation & Order Processing

Our customer service team responds promptly to inquiries and quotation requests. All in-stock orders will be processed within one working day. We provide stocking reservation services for long-term cooperative customers, effectively solving problems such as component shortages and unstable supply chains.

4. Professional Technical Support

Our senior engineer team provides free technical consultation, model selection guidance and original manufacturer datasheets. We assist customers in solving problems related to product R&D, circuit design and component application, providing reliable technical support for project progress.

5. Sourcing for Special Components

Relying on our global supply chain network, we professionally source scarce components, obsolete parts and customized special components to efficiently solve your procurement difficulties.

6. Global Logistics & Document Services

We cooperate with mainstream international logistics providers including DHL, FedEx, UPS and TNT to achieve fast global delivery. We can provide complete export documents such as customs declaration files, commercial invoices and packing lists to ensure smooth customs clearance for international shipments. Local pickup is also available for customers in Shenzhen, China.

Professional Packaging Standards

Electronic components are sensitive to static electricity, collision, moisture and dust. We adopt industry-standard anti-static packaging solutions to fully ensure the integrity of goods during transportation and storage.

1. General Packaging Specifications

  • All components are packed separately to avoid damage caused by friction and collision;
  • Shockproof buffer materials are added for fragile products to ensure transportation safety;
  • Each package is clearly marked with part number, quantity, batch number and specifications for easy inventory counting and management.

2. Classified Professional Packaging

  • Anti-static Packaging: Static-sensitive components such as chips, circuit boards and sensors are packaged with anti-static bags, shielding boxes and conductive foam in strict accordance with international anti-static standards to prevent static damage.
  • Vacuum Moisture-proof Packaging: Moisture-sensitive components are vacuum-sealed with desiccants to isolate humid air, suitable for ocean transportation and long-term storage.
  • Original Factory Packaging: Integrated circuits of brands such as NXP are delivered with original reels, trays or tubes by default, retaining complete original packaging and adapting to automated SMT production lines.
  • Discrete Device Packaging: Discrete devices such as SMD resistors, power resistors and LEDs are quantitatively and classifiedly packaged with accurate quantity and clear marking.
  • Connector / Aviation Connector Packaging: Hard outer packaging is adopted to prevent pin bending and structural deformation.

3. Custom Packaging Services

We provide value-added services including personalized packaging, custom labeling and re-reeling according to customer requirements, fully matching your production and warehouse management standards.

Contact Information

For service consultation or packaging customization, please feel free to contact us:
Email: info@ic-vendor.com
Tel / WhatsApp: +86 13760382860
Address: Room 2919, Guoli Building, Huaqiang North, Futian District, Shenzhen, Guangdong, China
 

Online Inquiry Form

Support Excel, PDF, CSV format files for full BOM list quotation

Submit your component procurement and custom packaging needs via the form below. We will provide a detailed quotation and professional solution within 1–8 working hours.